Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
264
datasets available to search
ShareScore release 0.9.0
Dataset results
264 results for “Ti”
Dataset for paper entitled 'Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis'.
<p>Dataset for paper entitled 'Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis'. doi: https://doi.org/10.1016/j.matchar.2020.110673</p>
EBSD Dataset of the Alpha and Beta Phase Orientations for Hot-rolled Ti-6Al-4V
<p>This is an EBSD dataset for hot-rolled Ti-6Al-4V alloy. It includes the EBSD maps of the starting material, and materials have been rolled at nine different temperatures (825°C, 865°C, 895°C, 915°C, 935°C, 950°C, 960°C, 975°C, 1020°C) to three reductions (50%, 75%, and 87.5%). Each rolled material was sampled from transverse direction (TD) and rolling direction (RD) and EBSD maps were taken from both directions. Materials rolled at 825°C and 915°C were further rolled to 94% reduction and EBSD maps were taken from TD. The information of each EBSD data is given in the metadata file in each folder.</p> <p>For materials rolled above 915°C, the beta phase was reconstructed with a software based on Burger's orientation relationship.</p> <p>The Matlab script for plotting EBSD maps, pole figures and ODFs can be downloaded <a href="https://zenodo.org/record/8328717">here</a>.</p>
Dataset for "Unravelling the Origin of Ultra-Low Conductivity in SrTiO3 Thin Films: Sr Vacancies and Ti on A-Sites Cause Fermi Level Pinning"
<p>Raw data used in the paper "Unravelling the Origin of Ultra-Low Conductivity in SrTiO3 Thin Films: Sr Vacancies and Ti on A-Sites Cause Fermi Level Pinning", available at DOI: 10.1002/adfm.202202226.</p> <p>Data include impedance spectra, extracted conductivities and defect chemical mdoel calculations:</p> <p>Impdance.csv: Impedance data for differently doped STO thin films</p> <p>Fe_04_10.csv: Conductivity vs. temperature for differntly depoed Fe:STO films<br> UD_Al_Ni.csv: Conductivity vs. temperature for undoped, Al-doped and Ni-doped films<br> 0_4Fe.csv: Conductivity vs. temperature for 0.4 % Fe doped films<br> pO2.csv: Conductivity vs. pO2 at different temperatures for 0.4 % Fe doped films</p> <p>Optimal_Brouwer.csv: Brouwer diagram for STO where A site Ti counterbalances Sr vacancies<br> Buffer_Curve.csv: Variation in the ratio of Sr vacancies to A site Ti<br> Site_Equilibrium.csv: Equilibrium defect concentrations for varying standard Gibbs free energy of the site change reaction<br> Ti_Switch: Total Gibbs free energy (and defects) for varying extent of site change reaction (amount of Ti on A site)<br> ParameterSpace.csv: Conductivity as a function of Standard Gibbs free energy of site change and energy level of Sr vacancies<br> ParameterSpaceXsi.csv: Conductivity as a function of extent of site change and energy level of Sr vacancies</p> <p>Fe_Optimal_Brouwer.csv: Brouwer diagram for Fe:STO where A site Ti counterbalances Sr vacancies<br> Fe_Buffer_Curve.csv: Variation in the ratio of Sr vacancies to A site Ti<br> ParameterSpaceIronG.csv: Conductivity as a function of Fe doping and Standard Gibbs free energy of site change</p>
Dataset for "In silico Positional Analogue Scanning with Amber GPU-TI"
<p>This repository contains the full data set and analysis scripts to reproduce all results for the manuscript "<a href="https://pubs.acs.org/doi/10.1021/acs.jcim.2c00860"><strong>In silico Positional Analogue Scanning with Amber GPU-TI</strong>, <em>J. Chem. Inf. Model.</em> 2022, 62, 18, 4448–4459</a>".</p> <p><a href="https://doi.org/10.1021/acs.jcim.2c00860">https://doi.org/10.1021/acs.jcim.2c00860</a></p> <p><br> The repository contains the following data:</p> <ul> <li><strong>20_PDB_66_MOL2_input_coordinates_for_PAS.tar.gz (7.7MB)</strong> <ul> <li>input structures of proteins (pdb format), ligands (mol2 format), experimental data and GPU-TI maps for all the 20 scans including Br-Scan, Cl-Scan, F-Scan, HO-Scan, MeO-Scan, Me-Scan, N-Scan.</li> </ul> </li> <li><strong>AMBER18.GPUTI.scripts.tar.gz (597.2 M)</strong> <ul> <li>Scripts and example of CDK8 TI output for GPU TI ddG calculation and cycle closure correlation.</li> </ul> </li> <li><strong>Supporting_Information_Tables_dG_ddG_small_big_change.xlsx (60kB)</strong></li> <li>AMBER18_input_fort files, parameter and topology files, first 500 ps equilibrated restart files, amber TI input files for each TI pair calculations (total 12.9 GB) <ul> <li><strong>AMBER-GPUTI_PAS_input.01.N-Scan.CDK8.tar.gz (736.2MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.02.N-Scan.Tankyrase.tar.gz (266.1 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.03.N-Scan.HCV_NS5B_gt1b.tar.gz (722.6 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.04.F-Scan.ox1r_antagonist.tar.gz (549.4 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.05.F-Scan.ox2r_antagonist.tar.gz (768.4 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.06.F-Scan.KAT6A.tar.gz (407.9 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.07.F-Scan.PDE1B.tar.gz (470.7 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.08.F-Scan.Akt1_kinase.tar.gz (390.6 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.09.Cl-Scan.PPAR_Gama.tar.gz (412.9 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.10.Cl-Scan.erk12.tar.gz (352.4 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.11.Cl-Scan.KAT6A.tar.gz (408.2 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.12.Br-Scan.PRMT4.tar.gz (522.1 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.13.Me-Scan.BD1_scaffold_thiophene.tar.gz (187.6 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.14.Me-Scan.BD1_scaffold_furan.tar.gz (187.3 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.15.Me-Scan.HIV-1.tar.gz (740.2 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.16.Me-Scan.PPAR_Gama.tar.gz (412.8 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.17.Me-Scan.avb6.tar.gz (2.2 GB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.18.MeO-Scan.KAT6A.tar.gz (409.3 MB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.19.MeO-Scan.ox2r_agonist.tar.gz (1.1 GB)</strong></li> <li><strong>AMBER-GPUTI_PAS_input.20.HO-Scan.ox2r_agonist.tar.gz (1.1 GB)</strong><br> </li> </ul> </li> <li><strong>Data Structures inside each files:</strong> <ul> <li><strong>directory_tree.20_PDB_66_MOL2_input_coordinates_for_PAS.txt (5 kB)</strong></li> <li><strong>directory_tree.AMBER18.GPUTI.scripts.txt (91 kB)</strong></li> <li><strong>directory_tree.AMBER18_input_for_PAS_GPUTI_simulations.txt (1.5 MB)</strong></li> </ul> </li> </ul>
Real-time observation of alpha nucleation in Ti-6Al-4V
<p>This video was captured during an in-situ heating stage SEM experiment using a secondary electron camera at the University of Manchester, UK. The Ti-6Al-4V sample was heated to 1000°C to the full β-phase field and then slowly cooled (0.3°C/s) through the β transus, and the α-phase nucleation was recorded by the contrast change in the secondary electron camera from topography development on the sample surface due to surface relief. Microscope operated by Dr Alec E Davis and Dr Jack Donoghue, sample preparation by Nick Byres. These results were published in an Acta Materialia paper in 2021:</p> <p>Acta Materialia paper: https://doi.org/10.1016/j.actamat.2021.117315</p> <p>Researchgate (free peer reviewed preprint): https://bit.ly/3EHs7Na</p>
Band Excitation Piezoresponse Force Microscopy of PbZr<sub>0.2</sub>Ti<sub>0.8</sub>O<sub>3</sub>
<p>Film grown and measurements conducted by Joshua C. Agar at Oak Ridge National Laboratory</p> <p> </p> <p>This dataset has been the subject of 4 manuscripts:</p> <p> </p> <p>1. Agar, J., Damodaran, A. R., Pandya, S., C, Cao, Y., Vasudevan, R. K., Xu, R., Saremi, S., Li, Q., Kim, J., McCarter, M. R., Dedon, L. R., Angsten, T., Balke, N., Jesse, S., Asta, M., Kalinin, S. V. & Martin, L. W. Three-State Ferroelastic Switching and Large Electromechanical Responses in PbTiO<sub>3 Thin Films. Adv. Mater. 29, 1702069 (2017). [doi:10.1002/adma.201702069](https://onlinelibrary.wiley.com/doi/10.1002/adma.201702069)</p> <p>2. Agar, J. C., Cao, Y., Naul, B., Pandya, S., van der Walt, S., Luo, A. I., Maher, J. T., Balke, N., Jesse, S., Kalinin, S. V., Vasudevan, R. K. & Martin, L. W. Machine detection of enhanced electromechanical energy conversion in PbZr<sub>0.2</sub>Ti<sub>0.8</sub>O<sub>3</sub> thin films. Adv. Mater. 30, e1800701 (2018). [doi:10.1002/adma.201800701](https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.201800701)</p> <p>3. Griffin, L. A., Gaponenko, I. & Bassiri-Gharb, N. Better, Faster, and Less Biased Machine Learning: Electromechanical Switching in Ferroelectric Thin Films. Adv. Mater. e2002425 (2020). [doi:10.1002/adma.202002425](https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002425)</p> <p>4. Qin, S., Guo, Y., Kaliyev, A. T. & Agar, J. C. Why it is Unfortunate that Linear Machine Learning ‘Works’ so well in Electromechanical Switching of Ferroelectric Thin Films. Adv. Mater. e2202814 (2022). [doi:10.1002/adma.202202814](https://onlinelibrary.wiley.com/doi/10.1002/adma.202202814)</p>
Synchrotron X-ray Diffraction Results - Measuring Bulk Crystallographic Texture from Differently-Orientated Ti-6Al-4V Samples
<p>A dataset of crystallographic texture results for both α (hexagonal close packed, hcp) and β (body-centred cubic, bcc) phases, measured from six differently orientated Ti-6Al-4V (Ti-64) samples, using two different analysis techniques of synchrotron X-ray diffraction (SXRD) data. The texture results are produced from two refinement methods for fitting intensities from SXRD pattern images; an established Rietveld refinement method using the software package <a href="http://maud.radiographema.eu">MAUD (Materials Analysis Using Diffraction)</a> and a new Fourier-based peak fitting method from the <a href="https://pypi.org/project/continuous-peak-fit/">Continuous-Peak-Fit</a> Python package. The texture results were also compared with electron backscatter diffraction (EBSD) measurements from a single sample orientation. The SXRD and EBSD textures were analysed using <a href="https://mtex-toolbox.github.io">MTEX</a> to enable a direct comparison of the pole figures, orientation distribution functions (ODFs) and numerical values for the texture indices. The SXRD texture is calculated from each of the six different sample orientations, a combination of the six sample orientations, and in a batch processing method for calculating spatially-resolved texture variation from 387 individual X-Y stage-scan SXRD measurements across one of the samples. The texture variation measured using stage-scan SXRD is directly compared with EBSD, by splitting up the EBSD map into an equivalent grid matrix using an automated script in MTEX.</p> <p><strong>Material </strong></p> <p>The Ti-64 material used in this study was pre-rolled to 87.5% reduction at 915ºC and then air-cooled to develop a characteristic texture. The run numbers from the experiment reference six different sample orientations, according to their alignment with the original rolling directions (RD – rolling direction, TD – transverse direction, ND – normal direction), and alignment with the horizontal (X) and vertical (Y) axes of the synchrotron detector.</p> <p><strong>MAUD / MTEX Analysis</strong></p> <p>The α and β phase texture for each of the six different sample orientations was calculated using MAUD, included in this <a href="https://doi.org/10.5281/zenodo.7311323">analysis dataset</a>, which produced ODFs in the form of text files. The texture files were analysed in MTEX using scripts from the <a href="https://github.com/LightForm-group/MAUD-batch-analysis">MAUD-batch-analysis</a> package, for plotting of the pole figures and ODF slices, along with calculation of pole figure maxima, ODF maxima and texture indices. The same procedure was used to analyse texture from all six orientations together; using MTEX to fit a single ODF text file. And a series of ODF text files were analysed to calculate texture variation from an X-Y stage scan of Sample 1 (103845). Two different ODF resolutions of 5º and 15º were initially used to fit the texture in MAUD, with the same ODF resolution applied to analyse the data in MTEX. However, an ODF resolution of 15° was found to reproduce the most reasonable texture strength intensity values, with the closest match to the EBSD results.</p> <p><strong>Continuous-Peak-Fit / MTEX Analysis </strong></p> <p>The lattice plane intensities for 21 α and 4 β phase peaks were extracted from the Continuous-Peak-Fit analysis, included in this <a href="https://doi.org/10.5281/zenodo.7311323">analysis dataset</a>, and saved as text files in the form of pole figures. The lattice intensity text files were analysed in MTEX using scripts from the <a href="https://github.com/LightForm-group/continuous-peak-fit-analysis">continuous-peak-fit-analysis</a> package, to plot pole figures and ODF slices, and to calculate pole figure maxima, ODF maxima and texture indices. The same procedure was used to analyse texture from all six orientations together, along with combinations of different sample orientations, by fitting combined lattice intensity text files in MTEX. And a series of lattice intensity text files were analysed to calculate texture variation from the X-Y stage scan of Sample 1 (103845). Lattice plane intensity distributions which had been normalised to a Ti-64 powder sample measurement were also analysed, to see if this had any effect on the texture intensities. Nevertheless, the powder-corrected texture was found to exactly match the raw intensity measurements. Three different ODF resolutions of 5º, 10º and 15º were initially used to fit the texture in MTEX. However, a kernel half-width of 10° was found to produce optimal data fitting, for highly accurate texture strength intensity values.</p> <p><strong>EBSD / MTEX Analysis </strong></p> <p>The indexed α-phase EBSD measurements were recorded over an area of around 100 mm<sup>2</sup>, with an equivalent sized map of β-phase orientations reconstructed from the data. Both the α and the β phase maps were analysed using the <a href="https://github.com/LightForm-group/MTEX-texture-block-analysis">MTEX-texture-block-analysis</a> package, which was used to split up the map into 387 individual square sections, with equivalent dimensions to the SXRD stage-scan measurement grid. For each of the 387 sections, MTEX was used to plot pole figures and ODF slices, and to calculate pole figure maxima, ODF maxima and texture indices.</p> <p><strong>Texture Variation Comparison</strong></p> <p>The texture values calculated from the SXRD stage scan measurements, with the two analysis methods, were used for a direct comparison with the texture variation recorded using EBSD. This analysis was recorded in the <a href="https://github.com/LightForm-group/texture-strength-comparison">texture-strength-comparison</a> package. The results show differences in texture variation across the piece depending on the method used to analyse the SXRD data. The Continuous-Peak-Fit analysis method shows the closest match with EBSD, producing clear texture intensity spikes for the different α and β lattice plane pole figure intensities, ODF maxima and texture indices, at the centre of the piece. The results were also used to develop SXRD maps showing the distribution of texture intensities across the sample.</p> <p><strong>Metadata </strong></p> <p>An accompanying YAML text file contains associated processing metadata for the SXRD and EBSD analyses, recording information about the different packages used to process the data, along with details about the different files contained within this results dataset.</p>
Abb. 1. a in Käfer aus Lichtfallenfängen in Conthey (VS) und in Seseglio (TI) (Coleoptera)
Abb. 1. a) Berosus spinosus (Steven, 1880), Seseglio (TI), Erstnachweis für die Schweiz. b) Dactylosternum abdominale (Fabricius, 1792), Conthey (VS), Erstnachweis für den Kanton Wallis. (Fotos C. Germann)
FESEM images after cultivating dental plaque on Ti-based metallic glass and Ti6Al4V
<p>Field Emission Scanning Electron Microscopy after culturing dental plaque on Ti<sub>40</sub>Zr<sub>10</sub>Cu<sub>36</sub>Pd<sub>14 </sub>bulk metallic glass compared with Ti6Al4V. </p>
Fundamental hydrogen storage properties of TiFe-alloy with partial substitution of Fe by Ti and Mn - Raw Dataset related to publication
<p>Data type: Experimental measurements and Rietveld Refinement. Date format: .xls, .xlsm,.opj, .pcr, .dat (Software FullProf package outputs). Origin of the data: Experimental EMPA, x-ray diffraction patterns, and kinetic measurements of hydrogen absorption. Data generated by electron probe micro-analysis (Cameca SX100), a Bruker D8 Advance Bragg Brentano diffractometer using Cu-Kα radiation (λ=1.5418 Å), and a home-made Sieverts’ type apparatus from CNRS, ICMPE, Thiais, France. Software needed to plot the data: Origin and Excel. Software needed to analyse the data: FullProf package.</p>
Data for "Investigation of local strain rate sensitivity in dual-phase Ti alloys by nanoindentation"
<p>Data for "Investigation of local strain rate sensitivity in dual-phaes Ti alloys by nanoindentation"</p> <p>Tea-Sung Jun1, David E.J. Armstrong2 and T. Benjamin Britton1<br /> 1. Department of Materials, Imperial College London, Prince consort Road, London, SW7 2AZ, UK<br /> 2. Department of Materials, University of Oxford, Parks Road, Oxford, OX1 3PH, UK</p> <p>--</p> <p>This nanoindentation data folder contains 3 subfolders:<br /> (1) Raw indentation data obtained from TestWorks<br /> (2) Data for Figure 4<br /> (3) Data for Figure 5</p> <p>--</p> <p>In the subfolder (1), each file name indicates Material_Grain orientation_Indentation strain rate (e.g. 6242_H_0001). <br /> For the subfolders (2) and (3), readers can plot the graphs either using Excel, OriginPro or other software. <br /> Note that we used the OriginPro to generate all the graphs in this article.</p> <p>--</p> <p>If readers need further information, please feel free to contact: t.jun@imperial.ac.uk or terryjun83@gmail.com (Tea-Sung (Terry) Jun)</p>
Data for "Local strain rate sensitivity of single α phase within a dual-phase Ti alloy"
<p>Data for "Local strain rate sensitivity of single a phase within a dual-phase Ti alloy"</p> <p>Tea-Sung Jun, Zhen Zhang, Giorgio Sernicola, Fionn P.E. Dunne and T. Benjamin Britton<br /> Department of Materials, Imperial College London, Prince consort Road, London, SW7 2AZ, UK</p> <p>--</p> <p>This micropillar compression data folder contains 6 subfolders:<br /> (1) Micropillar compression videos<br /> (2) Data for Figure 6<br /> (3) Data for Figure 7<br /> (4) Data for Figure 10<br /> (5) Data for Figure 11<br /> (6) Data for Figure 12</p> <p>--</p> <p>In the subfolder (1), each file name indicates 'Pillar name (Slip system, Strain rate)', e.g. Pillar 1 (Basal, 0.01). <br /> For the subfolders (2) ~ (6), readers can plot the graphs either using Excel, OriginPro or other software. <br /> Note that we used the OriginPro to generate all the graphs in this article.</p> <p>--</p> <p>If readers need further information, please feel free to contact: t.jun@imperial.ac.uk or terryjun83@gmail.com (Tea-Sung (Terry) Jun)</p>
Determination of ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity
<p>Data for "Determination of ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity"<br /> http://dx.doi.org/10.1016/j.jmps.2016.06.007</p> <p><br /> Zhen Zhang, Tea-Sung Jun, T. Benjamin Britton and Fionn P.E. Dunne<br /> Department of Materials, Imperial College London, Prince consort Road, London, SW7 2AZ, UK</p> <p>--</p> <p>This experimental data folder contains 3 subfolders:<br /> (1) Micropillar compression videos<br /> (2) Simulation data</p> <p>(3) Data for Figure 4<br /> (4) Data for Figure 6</p> <p>--</p> <p>The simulation data in (2) is ABAQUS input deck containing an example finite element representation of an alpha-beta titanium micropillar subjected to compression loading. This model was calibrated against the experimental data using the first 60s of the stress relaxation period.</p> <p>--</p> <p>If readers need further information, please feel free to contact: zhen.zhang@imperial.ac.uk</p>
Polymorphic structure of a-type screw dislocation cores in alpha-Ti
<p class="p1">The dislocation core structure has a significant role in determining the dominant slip plane and the magnitude of the Peierls stress for a dislocation. An important challenge when studying dislocation cores is to determine the stable and metastable core morphologies, and then relate these structures to the dynamics of the dislocations. This study introduces a method for identifying core structures that are metastable at zero temperature. Application of this method to ⟨a⟩-type screw dislocations in α-Ti (as described using an empirical potential) reveals a multitude of (meta-)stable non-planar cores. </p> <p>This dataset contains the LAMMPS files for all the (meta-)stable morphologies of screw dislocation cores in α-Ti as described by Hennig's MEAM potential identified in this study. We identified stable core configurations for an ⟨a⟩-type screw dislocation under a compressive non-Schmid stress of 0, 250, 500, 750, and 1000 MPa applied in the [1-100] direction.</p>
Video 7.2: Ti-oxide M11
<p><strong>Video 7.2: M11</strong> LA-ICP-MS trace element accessory mineral maps, Grunnes steatite quarry, sample RC180410c</p> <p>In these maps, the darkest purple colours indicate very low (or absent) concentrations of the element for that map. With increasing concentrations of that element, the colour changes across the spectrum from purple through blue, with the brightest cyan tones indicating "very high" concentrations of that element, with respect to the total amounts of that element measured for each sample. For the trace elements the highest concentrations may be only a few ppm, yet still be represented by the bright blue shades for one or more crystals, in contrast to the total absence (very dark purple to black), or much lower levels (brighter purple) of the other crystals analysed. Therefore, the below list of element concentration maps included in this film also indicates which of these elements are the major elements (dominate) of a given crystal, and which are trace elements.</p> <p>The video sequence (approximate times) is: </p> <ul> <li>0:00 The location of Grunnes quarry</li> <li>0:09 hand sample RC180410c from that quarry</li> <li>0:12 the Ti-oxide crystal plus surrounding matrix grains analysed as map M11</li> <li>0:14 Fe (dominate in the ilmenite)</li> <li>0:17 Mn (richer in a narrow band of an unidentified matrix mineral)</li> <li>0:19 Ti (dominate in the ilmenite)</li> <li>0:21 V (trace amounts in the ilmenite, and, to a lesser extent, in the chlorite)</li> <li>0:23 Co (trace amounts highest in the chlorite > talc > ilmenite > other matrix)</li> <li>0:26 W (trace amounts highest in a gap between two segments of the ilmenite, and in cracks in the ilmenite)</li> <li>0:28 Ni (low trace amounts in the chlorite and talc, much lower in the ilmenite and other two matrix grains)</li> <li>0:30 Mg (dominate in the matrix grains).</li> <li>0:33 the reflected light image of the crystals (repeated)</li> <li>0:35 a collage of all of the above trace element maps surrounding the reflected light image, plus the addition of maps for Cu, Al, and Y, as these are elements which also feature in the minerals present.</li> </ul>
Video B.3: Ti-oxide M12
<p><strong>Video B.3: Ti-oxide M12</strong> LA-ICP-MS trace element accessory mineral maps, Dalhaugen steatite quarry, sample RC180409a </p> <p>In these maps, the darkest purple colours indicate very low (or absent) concentrations of the element for that map. With increasing concentrations of that element, the colour changes across the spectrum from purple through blue, with the brightest cyan tones indicating "very high" concentrations of that element, with respect to the total amounts of that element measured for each sample. For the trace elements the highest concentrations may be only a few ppm, yet still be represented by the bright blue shades for one or more crystals, in contrast to the total absence (very dark purple to black), or much lower levels (brighter purple) of the other crystals analysed. Therefore, the below list of element concentration maps included in this film also indicates which of these elements are the major elements (dominate) of a given crystal, and which are trace elements. </p> <p>The video sequence (approximate times) is: </p> <ul> <li>00:00 The location of Dalhaugen steatite quarry</li> <li>00:10 photo of Dalhaugen steatite quarry</li> <li>00:12 hand sample RC180409a from Dalhaugen steatite quarry</li> <li>00:15 reflected light image of a nearly Z-shaped ilmenite crystal, plus surrounding matrix grains analysed as map M12</li> <li>00:17 Cr (trace element, with highest concentration in a small (~5 x 15 µm) inclusion of Fe-oxide (located in the middle left of the ilmenite grain), and the next highest levels located in the chlorite)</li> <li>00:19 Fe (dominate in the small Fe-oxide inclusion and the large ilmenite crystal, minor in the matrix minerals)</li> <li>00:22 Sr (trace amounts in the chlorite)</li> <li>00:24 Cu (dominate in the tiny (~5 µm diameter) chalcopyrite inclusion at the lower right hand edge of the map)</li> <li>00:26 Ti (dominate in the large ilmenite crystal)</li> <li>00:28 V (trace amounts, with the highest concentration in the small inclusion of Fe-oxide, and the next highest levels in the large ilmenite crystal)</li> <li>00:30 Mg (dominate in the chlorite and talc),</li> <li>00:32 Mn (minor amounts in the ilmenite crystal)</li> <li>00:35 Ni (trace amounts in the chalcopyrite inclusion)</li> <li>00:37 W (trace amounts, associated with cracks and minor inclusion trails in the ilmenite crystal)</li> <li>00:39 Ag (amounts in the chalcopyrite inclusion)</li> <li>00:42 the reflected light image of the crystals (repeated)</li> <li>00:44 A collage of all of those maps surrounding the reflected light image, plus the addition of maps for Zn and Co, as these are also trace elements in the chalcopyrite inclusion.</li> </ul>
Video B.5 Ti-oxide M25
<p><strong>Video B.5 Ti-oxide M25</strong> LA-ICP-MS trace element accessory mineral maps, Dalhaugen steatite quarry, sample RC180409b </p> <p>In these maps, the darkest purple colours indicate very low (or absent) concentrations of the element for that map. With increasing concentrations of that element, the colour changes across the spectrum from purple through blue, with the brightest cyan tones indicating "very high" concentrations of that element, with respect to the total amounts of that element measured for each sample. For the trace elements the highest concentrations may be only a few ppm, yet still be represented by the bright blue shades for one or more crystals, in contrast to the total absence (very dark purple to black), or much lower levels (brighter purple) of the other crystals analysed. Therefore, the below list of element concentration maps included in this film also indicates which of these elements are the major elements (dominate) of a given crystal, and which are trace elements. </p> <p>The video sequence (approximate times) is: </p> <ul> <li>00:00 The location of Dalhaugen steatite quarry</li> <li>00:10 photo of Dalhaugen steatite quarry</li> <li>00:12 hand sample RC180409b from Dalhaugen steatite quarry</li> <li>00:15 reflected light image of the fairly square, and inclusion-rich ilmenite crystal, plus surrounding matrix grains analysed as map M25, </li> <li>00:17 Cr (trace in the chlorite)</li> <li>00:19 Fe (dominate in the ilmenite crystal, and even higher levels in the pyrite inclusion)</li> <li>00:22 S (dominate in the pyrite inclusion)</li> <li>00:24 Co (trace amounts in the pyrite inclusion</li> <li>00:26 V (trace amounts in the ilmenite crystal</li> <li>00:29 P (dominate in the apatite)</li> <li>00:30 Bi (trace amounts in the pyrite inclusion and the apatite)</li> <li>00:33 Ti (dominate in the ilmenite crystal)</li> <li>00:36 Mg (dominate in the chlorite and talc)</li> <li>00:38 Mn (minor amounts in the ilmenite crystal)</li> <li>00:40 Ni (trace amounts in the pyrite inclusion.</li> <li>00:42 the reflected light image of the crystals (repeated)</li> <li>00:45 A collage of all of those maps surrounding the reflected light image.</li> </ul> <p> </p>
Data for "Competition between phase ordering and phase segregation in the Ti$_x$NbMoTaW and Ti$_x$VNbMoTaW refractory high-entropy alloys"
<p>Data associated with the arXiv preprint: "Competition between phase ordering and phase segregation in the Ti$_x$NbMoTaW and Ti$_x$VNbMoTaW refractory high-entropy alloys". Version 2 corrects an error in the files associated with fitted atom-atom interaction energies.</p>
The amplitudes of electric fields generated by TI stratrgy under different electrode montages
<p>This dataset containes the amplitudes of electric fields generated by extraocular temporally interfering electrical stimulation under all the electrode mongtages mentiond in our research.There also original figures of our research. </p>
Dataset for paper entitled, 'Tailoring equiaxed β-grain structures in Ti-6Al-4V coaxial electron beam wire additive manufacturing'
<p>Dataset for paper entitled, 'Tailoring equiaxed β-grain structures in Ti-6Al-4V coaxial electron beam wire additive manufacturing'. Abstract: High-deposition-rate, directed-energy-deposition additive manufacturing (DED-AM) processes typically produce Ti-6Al-4V (Ti64) components with coarse columnar β-grain structures that lead to undesirable mechanical anisotropy, as well as a fine heterogeneous lamellar transformation microstructure, which is very different to that seen standard wrought products. This arises because of the intrinsic lack of constitutional undercooling at the solidification front, and the subsequent high cooling rates and rapid thermal cycling experienced by the deposited material. In this work, the more refined primary β-grain solidification structures and textures seen in components built with the novel coaxial electron beam wire DED AM (CEWAM) process have been characterised in detail, for the first time, with the aim of investigating the potential for this technology to directly replicate the β-annealed damage-tolerant microstructure used in large Ti64 aerospace forgings. Due to its different lower energy density solidification conditions, it has been confirmed, by electron backscatter diffraction (EBSD) analysis and β-grain reconstruction in three orthogonal cross-sections, that the CEWAM process changes the melt conditions to promote β-grain nucleation ahead of the solidification front, which can result in a highly refined, equiaxed, β-grain structure. However, the conditions for refinement were marginal and a mixed grain structure was commonly observed in thicker sections. Additionally, the subsequent grain-growth stability during β-annealing was investigated. It is shown that an equivalent microstructure can be achieved to that seen in a standard β-forged component, by grain structure homogenisation and slow cooling through the β transus, to promote α colony nucleation, allowing direct part substitution. This was made possible by the refined primary β-grain structure achieved during deposition with the CEWAM solidification conditions which, importantly, are also shown to lead to a weaker texture than in a typical forging.</p> <p>Paper doi: https://doi.org/10.1016/j.mtla.2021.101202</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.