Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4,481
datasets available to search
ShareScore release 0.9.0
Dataset results
4,481 results for “research journal”
Data supplementing the article: Schultz, N.M., Lawrence P.J, Lee X., Global satellite data highlights the diurnal asymmetry of the surface temperature response to deforestation. Journal of Geophysical Research - Biogeosciences
<p>These data supplement the article: Schultz, N.M., Lawrence P.J, Lee X. Global satellite data highlights the diurnal asymmetry of the surface temperature response to deforestation, under review at the Journal of Geophysical Research - Biogeosciences.</p> <p>contact: Natalie M. Schultz, natalie.schultz@yale.edu</p> <p>Below are descriptions of the data files included here:</p> <p><br> (1) Global LST data: globalLST_Forest_Open.YYYY.nc [2003-2013]</p> <p>- DayLST1/NightLST1 and DayLST2/NightLST2 are the final (after the DEM correction) LST values for forest, and open land cover classes, respectively.<br> - Count variables show the number of pixels of each land cover class in each 0.5 degree grid<br> - The average elevation of each class is given by the DEM1 and DEM2 vars<br> - The DEM correction is the dLSTdDEM vars</p> <p>(2) Global fluxes data: globalFluxes_Forest_Open.YYYY.nc [2003-2013]<br> - Again, forest class = var1, open class = var2<br> - SWRABS is absorbed solar radiation<br> - LE is the latent heat flux<br> - HP is the heating potential term, as defined in the manuscript<br> - As described for the LST data, class pixel counts and DEM data are included</p> <p>(3) climzones3.nc<br> - The delineation of the three climate zones defined in this paper</p> <p>(4) MERRA inversion data: MERRA_11yr_TS_T10M.mat [2003-2013]<br> - 11 years of daily 1am local data averaged over 8-day intervals for 2003-2013<br> - TS = surface temperature<br> - T10M = 10M air temperature (above d)</p> <p> </p> <p> </p>
The results of thermodynamic calculations for alloys presented in a paper published in Journal of Materials Research and Technology, 2023, 27, pp. 6182–6191
<p>Thermophysical data for the alloys developed within the project. The results have been published in ournal of Materials Research and Technology, 2023, 27, pp. 6182–6191.</p>
Journal of Hymenoptera Research: Journal of Hymenoptera Research (831)
The Journal of Hymenoptera Research is a peer-reviewed, open-access, rapid online journal launched to accelerate research on all aspects of Hymenoptera, including biology, behavior, ecology, systematics, taxonomy, genetics, and morphology. All published papers can be freely copied, downloaded, printed and distributed at no charge for the reader. Authors are thus encouraged to post the pdf files of published papers on their homepages or elsewhere to expedite distribution. There is no charge for color. ISSN 1314-2607 (online) | ISSN 1070-9428 (print)<p></p>The Journal of Hymenoptera Research is a peer-reviewed, open-access, rapid online journal launched to accelerate research on all aspects of Hymenoptera, including biology, behavior, ecology, systematics, taxonomy, genetics, and morphology. All published papers can be freely copied, downloaded, printed and distributed at no charge for the reader. Authors are thus encouraged to post the pdf files of published papers on their homepages or elsewhere to expedite distribution. There is no charge for color. ISSN 1314-2607 (online) | ISSN 1070-9428 (print)
Data and scripts for Journal of Geophysical Research – Earth Surface publication: Identification of debris-flow channels using high-resolution topographic data: A case study in the Quebrada del Toro, NW Argentina
<p>This data source contains scripts and data associated with the JGR Earth Surface publication <strong>“Identification of debris-flow channels using high-resolution topographic data: A case study in the Quebrada del Toro, NW Argentina”</strong> by A. Mueting, B. Bookhagen, and M. R. Strecker. The Digital Elevation Model (DEM) of the lower part of the Quebrada del Toro and Río Capilla catchment in the NW Argentinian Andes was generated from SPOT-7 tri-stereo images using Ames Stereo Pipeline. The final dataset has a spatial resolution of 3 m. A full description of the DEM generation process and accuracy assessment can be found in the associated paper. The scripts are also available at https://github.com/UP-RS-ESP/DEM_ConnectedComponents.</p>
Simulation Results of the Paper entitled "The Design of a Zone-Picking System with Cooperation Area between Neighboring Zones and Its Cooperation Methods" (submitted to International Journal of Production Research)
<p>Simulation Results of the Paper entitled “The Design of a Zone-Picking System with Cooperation Area between Neighboring Zones and Its Cooperation Methods” (submitted to International Journal of Production Research)</p>
Code for noise-based seismic velocity changes estimation with the Bezymianny volcano data set. Journal of Volcanology and Geothermal Research.
<p>This file contains all the data and the python scripts used to estimate seismic velocity changes for the Bezymianny volcano (Klyuchevskoy volcano group). It also includes a guideline README.pdf with the description how to reproduce all the results presented in the paper <strong>Berezhnev Y., Belovezhets N., Shapiro N., Koulakov I. (2022), Temporal changes of seismic velocities below Bezymianny volcano prior to its explosive eruption on 20.12.2017, Journal of Volcanology and Geothermal Research</strong></p>
International Journal of Social Research Methods: 25th Anniversary Editorial bonus material (methods and data)
<p>This dataset accompanies the 25th Anniversary Editorial bonus material (methods and data) of the International Journal of Social Research Methods.</p> <p>https://www.tandfonline.com/journals/tsrm20/collections/TSRM_25th_Anniversary_SI</p>
Open Access Publication of Public Health Research in African Journals: Dataset
<p>This study explored the open publishing practices of African journals expected to publish articles on Public Health.</p>
The sharing of research raw data in journals indexed in the Cell & Tissue Engineering JCR category (2011-2015)
<p>The availability of research data sets is an important milestone since it can enhance the dynamics of research. This study aims to analyze the PubMed Central repository to determine the availability and type of raw data sets in Cell & Tissue Engineering journals indexed in the Journal Citation Reports. The number and types of files were registered. A search of the 21 journals from the Cell & Tissue Engineering category of the 2015 Journal Citation Reports was conducted. Information was collected from October to December 2016. A study of the supplementary material of the original articles published between 2011-2015 was performed through a search in the PubMed Central repository, which is the most used free full-text repository in biomedicine. Only articles with supplementary material were retrieved. The number and types of files were registered. In cases where a compressed file, such as a .zip or .rar file, was found, it was opened to check what kinds of files it contained.</p>
Dataset used in the article: Cunico, G., Aivazidou, E., Mollona, E. (2019), "European Cohesion Policy performance and citizens' awareness: A holistic System Dynamics framework", Investigaciones Regionales – Journal of Regional Research (In Press)
<p>In the context of the abovementioned article, interviews with experts about EU funding, as well as a workshop, were performed to find any missing factors or links in the conceptual model developed. This dataset provides detailed information about the interviews and the workshop. The related research is conducted in the context of the Horizon 2020 project PERCEIVE (www.perceiveproject.eu).</p>
Data set of manuscript entitled "Spatiotemporal evolution of long- and short-term slow slip events in the Tokai region, central Japan, estimated from a very dense GNSS network during 2013–2016" submitted to the Journal of Geophysical Research: Solid Earth
<p>This data set was used for manuscript entitled “Spatiotemporal evolution of long- and short-term slow slip events in the Tokai region, central Japan, estimated from a very dense Global Navigation Satellite Systems (GNSS) network during 2013–2016” submitted to the Journal of Geophysical Research: Solid Earth. This data set includes 1 figure file, 1 station list and 26 numerical data files. Figure and numerical data are locations of GNSS stations and GNSS time series used in our submitted manuscript, respectively.</p> <p>Figure file maned “location_of_station.png” shows locations of GNSS stations used in our submitted manuscript. Blue dots denote a continuous GNSS network named GEONET was installed by the Geospatial Information Authority of Japan, and red triangles denote continuous GNSS stations constructed by the Japanese University Consortium for GPS Researchers (JUNCO) and operated by the Earthquake Research Institute at the University of Tokyo and allied universities.</p> <p>The coordinates of JUNCO station are collected in a file named “site_junco.bl”. Description of each column is as follows:</p> <p>1. Column 1: Longitude in degree.</p> <p>2. Column 2: Latitude in degree.</p> <p>3. Column 3: Station name.</p> <p>Numerical data is GNSS time series, corresponds to the corrected time series in our submitted manuscript, observed for the period between 1 January 2013 and 31 January 2016. A complete description of data set is found in our submitted manuscript. Description of each column is as follows:</p> <p> </p> <p>1. Column 1: Days since 31 December 2012.</p> <p>2. Column 2: East displacement in cm</p> <p>3. Column 3: North displacement in cm</p> <p>4. Column 4: Vertical displacement in cm</p> <p>5. Column 5: Standard deviation of east displacement in cm</p> <p>6. Column 6: Standard deviation of north displacement in cm</p> <p>7. Column 7: Standard deviation of vertical displacement in cm</p> <p> </p> <p>The numerical data in this data set includes only the 26 JUNCO stations data. Numerical data files are named by the regularity of the combination of the 4 characters station name and extension “.dat”.</p>
Journal of Hymenoptera Research: Journal of Hymenoptera Research- old
The Journal of Hymenoptera Research is a peer-reviewed, open-access, rapid online journal launched to accelerate research on all aspects of Hymenoptera, including biology, behavior, ecology, systematics, taxonomy, genetics, and morphology. All published papers can be freely copied, downloaded, printed and distributed at no charge for the reader. Authors are thus encouraged to post the pdf files of published papers on their homepages or elsewhere to expedite distribution. There is no charge for color. ISSN 1314-2607 (online) | ISSN 1070-9428 (print)<p></p>
Journal of Hymenoptera Research
The Journal of Hymenoptera Research is a peer-reviewed, open-access, rapid online journal launched to accelerate research on all aspects of Hymenoptera, including biology, behavior, ecology, systematics, taxonomy, genetics, and morphology. All published papers can be freely copied, downloaded, printed and distributed at no charge for the reader. Authors are thus encouraged to post the pdf files of published papers on their homepages or elsewhere to expedite distribution. There is no charge for color. ISSN 1314-2607 (online) | ISSN 1070-9428 (print)<p></p>
Una rivista ad accesso aperto, senza costi per gli autori e di alta qualità: la storia del "Journal of Machine Learning Research". [Video]
<p>«Times have changed. Articles now circulate easily via the Internet, but unfortunately MLJ publications are under restricted access. […] In summary, our resignation from the editorial board of MLJ reflects our belief that journals should principally serve the needs of the intellectual community, in particular by providing the immediate and universal access to journal articles that modern technology supports, and doing so at a cost that excludes no one.» Questa lettera di dimissioni, firmata dalla maggioranza degli editor della rivista Machine Learning (Kluwer ), sancì la nascita del Journal of Machine Learning Research, una rivista open access, subito accreditatasi tra le più qualificate sedi di pubblicazione per le ricerche nel settore del machine learning. Una vicenda che risale al 2000, ma che, ad anni di distanza, non cessa di far discutere. Come quando nel 2011 Kent Anderson (Scholarly Kitchen) mise in dubbio la sostenibilità di riviste open access e senza costi per gli autori. «In my field (computer science) one of the most prominent journals is entirely free and open access (Journal of Machine Learning Research)» fu la secca replica di Yann LeCun. Ne nacque una discussione, proseguita sul blog di Stuart Shieber, che appare emblematica sotto diversi aspetti e di cui proveremo a riassumere i punti salienti.</p>
Additional climate information for research paper «Ecological and Geographical Analysis of Distribution of Heracleum persicum, H. mantegazzianum and H. sosnowskyi on The Northern Limit of Its Invaded Range in Europe» submitted to Russian Journal of Biological Invasions
<p><strong>Additional climate information for research paper «Ecological and Geographical Analysis of Distribution of Heracleum persicum, H. mantegazzianum and H. sosnowskyi on The Northern Limit of Its Invaded Range in Europe» submitted to Russian Journal of Biological Invasions </strong></p>
Dataset to manuscript "The role of weathering on morphology and rates of escarpment retreat of the rift margin of Madagascar" by Wang et al. (2023) submitted to Journal of Geophysical Research-Earth Surface.
<p>The dataset includes the relevant raw chemical element content data and the chemical weathering condition analysis of river sediment samples of Madagascar. The dataset is a supplement to the manuscript "The role of weathering on morphology and rates of escarpment retreat of the rift margin of Madagascar", by Wang et al. (2023) submitted to the Journal of Geophysical Research-Earth Surface. Commercially sensitive data is hidden but is available by request directly to the corresponding author. The data should <strong>NOT</strong> be used commercially.</p> <p>A MATLAB code for the weathering indices calculation is open-access on GitHub (https://github.com/yanyanwangesd/chemical_weathering). Please contact the corresponding author for more info or technical support on using the code. </p>
Datasets for "Trapdoor fault activation: a step towards caldera collapse at Sierra Negra, Galápagos, Ecuador", Journal of Geophysical Research: Solid Earth
<p>The following files were used in the analysis from "Trapdoor fault activation: a step towards caldera collapse at Sierra Negra, Galápagos, Ecuador", <em>Journal of Geophysical Research: Solid Earth</em>:</p> <p><strong>alos2_csk/alos2_sm1_dsc_20180504_20180713/:</strong> Includes DEM used in processing of the ALOS-2 SM1 descending interferogram spanning 4 May 2018–13 July 2018 (dem.2alks_2rlks.crop.*); geocoded SAR offsets in pixels (range resolution=1.43 m/pixel; azimuth resolution=2.01 m/pixel; denseOffsets.bil.2alks_2rlks.geo*); geocoded SNR of SAR offsets (denseOffsets_snr.bil.2alks_2rlks.geo.*); geocoded, unwrapped interferometric phase (filt_topophase.unw.2alks_2rlks.geo.*); geocoded incidence and heading angle for the interferogram (los.rdr.2alks_2rlks.geo.*); all in ISCE format.</p> <p><strong>alos2_csk/alos2_sm3_asc_20180114_20180701/:</strong> Includes DEM used in processing of the ALOS-2 SM3 ascending interferogram spanning 14 January 2018–1 July 2018 (dem.crop.*); geocoded, unwrapped interferometric phase (filt_topophase.unw.geo.*); geocoded incidence and heading angle for the interferogram (los.rdr.geo.*); all in ISCE format.</p> <p><strong>alos2_csk/alos2_wd1_dsc_147_180518_180629/</strong>: Includes DEM used in processing of the ALOS-2 WD1 descending interferogram spanning 18 May 2018–29 June 2018 (crop.dem.*); geocoded, unwrapped interferometric phase (filt_180629-180518_2rlks_14alks.unw.geo.*) ; geocoded incidence and heading angle for the interferogram (180629-180518_2rlks_14alks.los.geo.*); geocoded coherence for the interferogram (180629-180518_2rlks_14alks.cor.geo.*); geocoded mask for the interferogram (filt_topophase.unw.masked.geo.*); all in ISCE format.</p> <p><strong>alos2_csk/csk_asc_20180617_20180703/:</strong> Includes DEM used in processing of the COSMO-SkyMed ascending interferogram spanning 17 June 2018–3 July 2018 (dem.crop.*); geocoded SAR offsets in pixels (range resolution=1.54 m/pixel; azimuth resolution=2.48 m/pixel; denseOffsets.bil.geo.*); geocoded SNR of SAR offsets (denseOffsets_snr.bil.geo); geocoded incidence and heading angle for the interferogram (los.rdr.geo.*); all in ISCE format.</p> <p><strong>alos2_csk/csk_asc_20180703_20180719/</strong>: Includes DEM used in processing of the COSMO-SkyMed ascending interferogram spanning 3 July 2018–19 July 2018 (dem.crop.*); geocoded SAR offsets in pixels (range resolution=1.54 m/pixel; azimuth resolution=2.48 m/pixel; denseOffsets.bil.geo.*); geocoded SNR of SAR offsets (denseOffsets_snr.bil.geo); geocoded incidence and heading angle for the interferogram (los.rdr.geo.*); all in ISCE format.</p> <p><strong>alos2_csk/csk_dsc_20180618_20180704/:</strong> Includes DEM used in processing of the COSMO-SkyMed descending interferogram spanning 18 June 2018–4 July 2018 (dem.crop.*); geocoded SAR offsets in pixels (range resolution=1.70 m/pixel; azimuth resolution=2.45 m/pixel; denseOffsets.bil.geo.*); geocoded SNR of SAR offsets (denseOffsets_snr.bil.geo); geocoded incidence and heading angle for the interferogram (los.rdr.geo.*); all in ISCE format.</p> <p><strong>alos2_csk/csk_dsc_20180704_20180720/: </strong>Includes DEM used in processing of the COSMO-SkyMed descending interferogram spanning 4 July 2018–20 July 2018 (dem.crop.*); geocoded SAR offsets in pixels (range resolution=1.70 m/pixel; azimuth resolution=2.45 m/pixel; denseOffsets.bil.geo.*); geocoded SNR of SAR offsets (denseOffsets_snr.bil.geo); geocoded incidence and heading angle for the interferogram (los.rdr.geo.*); all in ISCE format.</p> <p><strong>S1.zip</strong>: Unwrapped, geocoded interferometric phase in meters for Sentinel-1 ascending and descending interferograms, spanning time periods of interest. </p> <p><strong>S1_20180630_20180706_asc_mask_nan_ref.grd: </strong>Unwrapped, geocoded, and masked interferometric phase for Sentinel-1 ascending interferogram spanning 30 June 2018–6 July 2018.</p> <p><strong>S1_20180701_20180707_desc_mask_nan_ref.grd: </strong>Unwrapped, geocoded, and masked interferometric phase for Sentinel-1 descending interferogram spanning 1 July 2018–7 July 2018.</p> <p><strong>tandemx12m_crop.grd</strong>: TanDEM-X 12 meter DEM in meters.</p> <p><strong>pleaides_tandemx12m_diff.grd</strong>: Difference between the TanDEM-X 12 meter DEM and the Pléiades-derived DEM, computed from images on 29 October 2018 and 6 December 2019.</p> <p><strong>trapdoorFaultSlip.zip</strong>: Discretized trapdoor fault patch dip-slip modeled to fit deformation from Sentinel-1 ascending interferograms, estimated using the Classic Slip Inversion software.</p> <p><strong>trapdoorFaultTraces.zip</strong>: Caldera and trapdoor fault traces, derived from <em>Bell et al. 2021</em>.</p> <p><strong>SN14_tilt_10s_2018-19.txt</strong>: Text filt containing date-time (sampled at 10 s, in matplotlib date-time number format), N-S tilt and E-W tilt. Tilt values can be converted to microradians by multiplying by a factor of 0.00129. Tilt data obtained from authors of <em>Bell et al. 2021</em>. For use of this dataset, please cite <a href="https://doi.org/10.1038/s41467-021-21596-4">https://doi.org/10.1038/s41467-021-21596-4</a>.</p>
Journal metrics as predictors of Research Excellence Framework 2021 results: Comparison of impact factor quartiles and Finnish expert-ratings - dataset
<p>This dataset accompanies the conference submission 'Journal metrics as predictors of Research Excellence Framework 2021 results: Comparison of impact factor quartiles and Finnish expert-ratings'. It contains the data in CSV format, one file per unit of analysis (Units of Assessment, Higher Education Institutions, and Subject Areas).</p> <p>The format of the UoA file is as follows (the other two files are analogous):</p> <ul> <li> <p>institution_name: name of higher education institution (e.g. university)</p> </li> <li> <p>unit_of_assessment_name: UoA name in REF (https://www.ref.ac.uk/panels/units-of-assessment/)</p> </li> <li> <p>main_panel: main panel in REF</p> </li> <li> <p>multiple_submission_letter: blank unless submitted to multiple panels.Exceptionally HEIs may have requested permission to make <a href="https://ref.ac.uk/publications-and-reports/invitation-to-make-requests-for-multiple-submissions-exception-from-submission-for-small-units-and-for-impact-case-studies-requiring-security-clearance/">two submissions from the same UoA to different panels</a>.</p> </li> <li> <p>multiple_submission_name: blank unless submitted to multiple panels</p> </li> <li> <p>non_english: number of articles in language other than English</p> </li> <li> <p>jufo_score_uoa: JUFO score (see paper for calculation details) of UoA</p> </li> <li> <p>jif_score_uoa: JIF score (see paper for calculation details) of UoA</p> </li> <li> <p>ref_score_uoa: REF score (see paper for calculation details) of UoA</p> </li> </ul>
Supplementary data for the study "Unveiling the rheological control of magmatic systems on volcano deformation: the interplay of poroviscoelastic magma-mush and thermo-viscoelastic crust ", submitted in the Journal of Geophysical Research: Solid Earth
<p>Supplementary data for the study "Unveiling the rheological control of magmatic systems on volcano deformation: the interplay of poroviscoelastic magma-mush and thermo-viscoelastic crust ", submitted in the Journal of Geophysical Research: Solid Earth</p>
Data from: Thermal springs and active fault network of the central Colca River basin, Western Cordillera, Peru, published in Journal of Volcanology and Geothermal Research
<p>We used hydrogeochemical analysis of 35 water samples from springs and geysers, together with isotopic (δ<sup>18</sup>O and δD) analysis, chemical and mineral studies of precipitates collected in the field around these outflows, and field observations to study the thermal system of the Colca River basin in S Peru. We aimed to determine the geochemistry of thermal waters, identify fluid sources and their origin, estimate reservoir temperature, and discuss the regional tectonic and volcanic framework. Our findings presented in Tyc et al. (2022; https://doi.org/10.1016/j.jvolgeores.2022.107513) corroborate a heterogeneous and complex geothermal system in the central region of the Colca River basin. This system exhibits contrasting hydrogeochemical and physical characteristics, variable isotope compositions, distinct reservoir temperatures, and associated precipitates near thermal springs. The control of water chemistry in this area is closely linked to the activity of the Ampato-Sabancaya magmatic chamber and the presence of tectonic structures, which enable intricate interactions between meteoric waters, magmatic fluids, and gases.</p> <p>Here, we present datasets used in the article (Tyc et al., 2022; https://doi.org/10.1016/j.jvolgeores.2022.107513), including:</p> <p>- Physicochemical characteristics of water samples collected by authors in the field in September 2012 and August–September 2017 (Table 1)</p> <p>- Chemical and isotopic composition of water samples collected by authors in the field in September 2012 and August–September 2017 (Table 2) and those monitored by INGEMMET in years 2013-2018 (Table 3)</p> <p>- Chosen molecular ratios discussed in Tyc et al., 2022 (Table 4)</p> <p>- Calculated reservoir temperature with the use of different Na/K geothermometers (Table 5)</p> <p>- Mineral phases in efflorescences precipitating at the water sampling sites (Table 6).</p> <p>Thirty-five sets of water samples were collected in the field in September 2012 and August–September 2017 using polyethylene bottles of high density (Table 1). Consequently, these were analyzed in the Water Analysis Laboratory at the University of Silesia in Katowice (Poland; Table 2). Water temperatures, pH, and electrical conductivity were measured in the field using portable pH meter CP-315 and conductivity meter CC-315, both with temperature sensors, with an accuracy of ±0.1 °C, ±0.01 pH, and ± 0.1% (up to 19.999 mS/cm) or ± 0.25% (above 20.00 mS/cm), respectively. Discharge of springs was estimated if possible (Table 1). Both cations and anions were analyzed by ion chromatography using Methron 850 Professional Ion Chromatograph with separate Metrosept C4–150 and A-supp 7–250 columns for cations and anions, respectively (Tables 2 and 4). Analysis of water analyses collected by INGEMMET in years 2013-2018 was performed at the INGEMMET Chemical Laboratory in Lima with the use of ion chromatography (Dionex ICS 5000) for the determination of anions and inductively coupled plasma optical emission spectrometry (ICP-OES) – VARIAN for cations (Table 3). Isotopic analyses (δ<sup>2</sup>H, δ<sup>18</sup>O) of 17 water samples collected in 2017 were performed at the Stable Isotope Laboratory Institute of Geological Sciences Polish Academy of Sciences (Table 2). The δ<sup>2</sup>H values of studied H<sub>2</sub>O were measured using the H-Device peripheral coupled to MAT 253 IRMS (Thermo Scientific) in a dual inlet system. For the determination of δ<sup>18</sup>O in H<sub>2</sub>O, an equilibration technique was used. The analysis used the GasBench II peripheral device (Thermo Scientific) coupled to MAT 253 IRMS with a continuous He flow. The AquaChem 4.0.284 software was used to evaluate the water samples' geochemical properties and calculate reservoir temperature for thermal waters (Table 5). Precipitates found at the water sampling sites were collected separately into plastic bags with strings and sealed boxes. These samples were subsequently analyzed at the Institute of Earth Sciences, University of Silesia in Katowice. The qualitative chemical composition and mineral characteristics were examined using a Philips XL 30 ESEM/TMP scanning electron microscope coupled with an energy-dispersive spectrometer (EDS; EDAX type Sapphire). The phase composition of the precipitates was determined through X-ray diffraction (XRD) using a Philips PW 3710 diffractometer. The XRD data were analyzed and interpreted using the X'Pert HIGHScore Plus software (Table 6).</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.