Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

509

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

509 results for “Version 2”

Learn how ShareScore rates datasets ↗
zenodo32/100

All-optical steering on the proton emission in laser-induced nanoplasmas - This is a new version. The data name of Figures 2 and 3 in version 2 is wrong, the data in Figure 2 correspods to Figure 3, and the data in Figure 3 correspods to Figure 2 in manuscript.

<p>all the raw data for the main figures of our literature "All-optical steering on the proton emission in laser-induced nanoplasmas"</p>

opencc-by-4.0May 2024View details →
zenodo32/100

Vulcan-scope 2 version 1.0

<p><span><span>A dataset representing United States carbon dioxide (CO<sub>2</sub>) emissions from electricity consumption (scope 2 CO<sub>2</sub> emissions) for the 2019-2021 time period separately for the residential, commercial, and industrial sectors. The spatial resolution is the U.S. census block group at annual time resolution.</span></span><span><span> We also provide state-scale aggregate data. Given the increased interest in greenhouse gas mitigation at the urban landscape scale, this data offers the opportunity to better understand the emitting landscape and craft more targeted, efficient policy instruments. </span></span><span><span>The approach starts with well-established estimates of scope 2 CO<sub>2</sub> emissions at larger scales and performs a series of downscaling steps to allocate scope 2 emissions into block groups. This open-access scope 2 CO<sub>2</sub> emissions dataset and methodology is valuable for a wide range of multidisciplinary studies, including climate science, environmental policy, urban planning socioeconomic research.</span></span></p>

opencc-by-4.0Jun 2024View details →
zenodo32/100

Dataset for Detecting Vehicle in Pedestrian Areas version 2

<p>The Car_Truck_Bus_Pedestrian-Area_v2.zip is an updated collection featuring a greater number of images, specifically 7808 images, each in very high resolution in .jpg format. The total file size is now 290 MB. It continues to serve the purpose of detecting vehicles in pedestrian areas within urban environments and is captured at a resolution of 1280&times;720 (HD). Each image is approximately 58 KB in size. The image data was collected from 100 strategically placed public CCTVs in Medell&iacute;n, Colombia, under various light and weather conditions, recorded every 60 seconds between 8:00 a.m. and 3:00 p.m. For each image, it is necessary to identify cars, buses, trucks, and pedestrians in particular zones, differentiated from the background. This enhanced dataset aims to train and evaluate machine learning models for urban traffic management and pedestrian safety applications. Data in this document is published under the Creative Commons Attribution 4.0 International License.</p>

opencc-by-4.0Jun 2024View details →
zenodo32/100

CHARMM36 POPS/POPC simulations (versions 1 and 2) 298 K 1.0 nm LJ switching with Na ions

<p>CHARMM36 mixed POPS and POPC bilayer simulations (298 K, starting structure from the CHARMM-GUI with 22 POPS and 110 POPC lipids) performed with a 1.0 nm point at which to switch off the van der Waals interactions. Two different simulations generated with different starting velocities are provided (the files are named v1 and v2 for these different simulations). The trajectories contain only the data from 400-500 ns of the simulations (as per the analysis provided on the nmrlipids blog) and additionally they have been processed with trjconv -skip 10 to keep the upload small. These simulations were performed with Na&nbsp;ions used to neutralise the system.</p>

opencc-by-4.0Feb 2018View details →
zenodo32/100

CHARMM36 POPS/POPC simulations (versions 1 and 2) 298 K 1.0 nm LJ switching with K ions

<p>CHARMM36 mixed POPS and POPC bilayer simulations (298 K, starting structure from the CHARMM-GUI with 22 POPS and 110 POPC lipids) performed with a 1.0 nm point at which to switch off the van der Waals interactions. Two different simulations generated with different starting velocities are provided (the files are named v1 and v2 for these different simulations). The trajectories contain only the data from 400-500 ns of the simulations (as per the analysis provided on the nmrlipids blog) and additionally they have been processed with trjconv -skip 10 to keep the upload small. These simulations were performed with K ions used to neutralise the system.</p>

opencc-by-4.0Feb 2018View details →
zenodo32/100

CHARMM36 POPS simulations (versions 1 and 2) 298 K 1.0 nm LJ switching with K ions

<p>CHARMM36 POPS simulations (298&nbsp;K, starting structure from the CHARMM-GUI) performed with a 1.0 nm point at which to switch off the van der Waals interactions. Two different simulations generated with different starting velocities are provided (the files are named v1 and v2 for these different simulations). The trajectories contain only the data from 400-500 ns of the simulations (as per the analysis provided on the nmrlipids blog) and additionally they have been processed with trjconv -skip 10 to keep the upload small. These simulations were performed with K ions used to neutralise the system.</p>

opencc-by-4.0Feb 2018View details →
zenodo32/100

GROMOS-CKP POPS/POPC simulations (versions 1 and 2) 298 K with GROMOS NH3 charges and PME

<p>GROMOS-CKP POPS/POPC simulations (298 K, starting structure from the CHARMM-GUI with the appropriate hydrogen atoms removed and with 22 POPS and 110 POPC lipids) performed with 1.4 nm cut-offs, PME and a long range dispersion correction.&nbsp;The charges for the NH3 part of the head group are taken from the standard GROMOS force field parameters. Two different simulations generated with different starting velocities are provided (the files are named v1 and v2 for these different simulations). The trajectories contain only the data from 400-500 ns of the simulations (as per the analysis provided on the nmrlipids blog) and additionally they have been processed with trjconv -skip 10 to keep the upload small.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

MacRog POPS simulations (versions 1 and 2) 298 K with corrected PO not OP tails

<p>MacRog&nbsp;POPS simulations (298 K, starting structure from the CHARMM-GUI) performed with 1.0 nm cut-offs, PME and a dispersion correction. Two simulations were performed with differently assigned random starting velocities. Note that unlike the original MacRog simulations, these have the correct PO and not OP tails.&nbsp;&nbsp;</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

GROMOS-CKP POPS/POPC simulations (versions 1 and 2) 298 K with Berger/Chiu NH3 charges and PME

<p>GROMOS-CKP POPS/POPC simulations (298 K, starting structure from the CHARMM-GUI with the appropriate hydrogen atoms removed and with 22 POPS and 110 POPC lipids) performed with 1.4 nm cut-offs, PME and a long range dispersion correction. The charges for the NH3 part of the head group are the same as in the Berger PS simulations (originally taken from the Berger/Chiu PC head group). Two different simulations generated with different starting velocities are provided (the files are named v1 and v2 for these different simulations). The trajectories contain only the data from 400-500 ns of the simulations (as per the analysis provided on the nmrlipids blog) and additionally they have been processed with trjconv -skip 10 to keep the upload small.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

Institutional Stove Solutions (InStove) Water Purifier Schematic version 2

<p>Version 2 of the InStove Water Purifier Diagram</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

GROMOS-CKP DPPE Simulations (versions 1 and 2) 342 K

<p>Two GROMOS-CKP DPPE bilayer simulations performed using GROMACS 5.0.6 for 500 ns with different starting velocities. Simulations were performed with a 1.4 nm cut-off with PME for the Coulombic and a 1.4 nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 342&nbsp;K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was taken from an equilibrated DPPE membrane simulated with an older version of the force field which used the PC charges in the head group (see the SI of https://pubs.acs.org/doi/abs/10.1021/jp207013v). The newer PE parameters were constructed using the standard GROMOS lysine parameters.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

GROMOS-CKP DOPE Simulations (versions 1 and 2) 271 K

<p>Two GROMOS-CKP DOPE bilayer simulations performed using GROMACS 5.0.6 for 500 ns with different starting velocities. Simulations were performed with a 1.4 nm cut-off with PME for the Coulombic and a 1.4 nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 271&nbsp;K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was taken from an equilibrated DOPE membrane simulated with an older version of the force field which used the PC charges in the head group (see the SI of https://pubs.acs.org/doi/abs/10.1021/jp207013v). The newer PE parameters were constructed using the standard GROMOS lysine parameters.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

GROMOS-CKP POPE Simulations (versions 1 and 2) 313 K

<p>Two GROMOS-CKP&nbsp;POPE bilayer simulations performed using GROMACS 5.0.6&nbsp;for 500 ns with different starting velocities. Simulations were performed with a 1.4&nbsp;nm cut-off with PME for the Coulombic and a 1.4&nbsp;nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 313 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was taken from an equilibrated POPE membrane simulated with an older version of the force field which used the&nbsp;PC charges in the head group (see the SI of https://pubs.acs.org/doi/abs/10.1021/jp207013v). The newer PE parameters were constructed using the standard GROMOS lysine parameters.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

Berger DOPE Simulations (versions 1 and 2) 271 K - de Vries repulsive H

<p>Two Berger-based DOPE bilayer simulations performed using GROMACS 4.0.7 for 200 ns with different starting velocities. Simulations were performed with a 1.0 nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 303 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was converted from an equilibrated DOPC&nbsp;membrane simulated with the GROMOS-CKP force field. The DOPE parameters were constructed following the approach used by de Vries et al (https://pubs.acs.org/doi/abs/10.1021/jp0366926), and so include a small repulsive potential on the explicit hydrogen atoms.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

Berger POPE Simulations (versions 1 and 2) 303 K - larger repulsive H

<p>Two Berger-based POPE bilayer simulations performed using GROMACS 4.0.7 for 200 ns with different starting velocities. Simulations were performed with a 1.0 nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 303 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was taken from an equilibrated POPE membrane simulated with the GROMOS-CKP force field. The PE parameters were constructed following the approach for DOPE used by de Vries et al (https://pubs.acs.org/doi/abs/10.1021/jp0366926), but with a slightly larger repulsive potential&nbsp;included for the explicit hydrogen atoms (designed to increase the area per lipid).</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

Berger POPE Simulations (versions 1 and 2) 303 K - de Vries repulsive H

<p>Two Berger-based&nbsp;POPE bilayer simulations performed using GROMACS 4.0.7 for 200 ns with different starting velocities. Simulations were performed with a 1.0 nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 303 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was taken from&nbsp;an equilibrated POPE&nbsp;membrane simulated with the GROMOS-CKP force field. The PE parameters were constructed following the approach for DOPE&nbsp;used by de Vries et al (https://pubs.acs.org/doi/abs/10.1021/jp0366926), and so include a small repulsive potential on the explicit hydrogen atoms.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

Berger DOPE Simulations (versions 1 and 2) 271 K - larger repulsive H

<p>Two Berger-based DOPE bilayer simulations performed using GROMACS 4.0.7 for 300 ns with different starting velocities. Simulations were performed with a 1.0 nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions with a dispersion correction. These simulations were performed at 303 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was converted from an equilibrated DOPC membrane simulated with the GROMOS-CKP force field.&nbsp;The DOPE parameters were constructed following the approach&nbsp;used by de Vries et al (https://pubs.acs.org/doi/abs/10.1021/jp0366926), but with a slightly larger repulsive potential included for the explicit hydrogen atoms (designed to increase the area per lipid).</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

OPLS-UA POPE Simulations (versions 1 and 2) 303 K with vdW on H atoms

<p>Two OPLS-UA POPE bilayer simulations performed using GROMACS 4.5.7 for 200 ns with different starting velocities. Simulations were performed with a 1.0 nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions interactions. These simulations were performed at 303 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was made through the conversion of an equilibrated OPLS-UA POPC membrane. The PE parameters were constructed by modifying the OPLS-UA POPC of Ulmschneider and Ulmschnider with the standard OPLS lysine parameters and the addition of&nbsp;LJ parameters on the hydrogen atoms in the head group (designed to increase the area per lipid).</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

OPLS-UA POPE Simulations (versions 1 and 2) 303 K

<p>Two OPLS-UA POPE bilayer simulations performed using GROMACS 4.5.7 for 200 ns with different starting velocities. Simulations were performed&nbsp;with a 1.0 nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions interactions. These simulations were performed at 303 K with a 128 lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure was made through the conversion of an equilibrated OPLS-UA POPC membrane. The PE parameters were constructed by modifying&nbsp;the OPLS-UA POPC&nbsp;of Ulmschneider and Ulmschnider with&nbsp;the standard OPLS lysine parameters.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

CHARMM36-UA POPE Simulations (versions 1 and 2) 310 K (NOTE: hexagonal membrane and POPE is called PEUA)

<p>Two CHARMM36-UA&nbsp;POPE bilayer simulations performed using GROMACS 5.0.6&nbsp;for 200 ns with different starting velocities. Simulations were performed with the standard CHARMM36&nbsp;settings: a 1.2&nbsp;nm cut-off with PME for the Coulombic interactions and a 1.2&nbsp;nm cut-off for the van der Waals interactions with the forces switched off at 1.0 nm. These simulations were performed at 310&nbsp;K with a 336&nbsp;hexagonal lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure of the membrane was made by reverse mapping an equilibrated MARTINI POPE bilayer (constructed with the INSANE script).</p>

opencc-by-4.0Jun 2018View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.