Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
307
datasets available to search
ShareScore release 0.9.0
Dataset results
307 results for “ecological analysis”
Figure 6 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 6. Models of the first three eigensurface (E-Surf) axes that describe the distribution of morphology among the 50 humerus specimens. Eigensurface axis 1 describes 41.8% of observed shape variation and shows clear differences in the shapes of the deltoid and bicipital crests between high and low scoring specimens. Eigensurface axis 2 accounts for 12.8% of morphological variation and describes more subtle variation in the shape of the deltoid crest. Eigensurface axis 3 includes 7.78% of surface shape variation and exhibits differences in the shape and position of the deltoid and bicipital crests between specimens. See text for further discussion of the shape changes and interpretation of the morphological variation described by these model axes.
Figure 9 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 9. Ordination of the falconiform species for which foraging flight-style information was available (42 species) within the space of the four canonical variates axes established in a CVA using 13 eigensurface shape variables. The distribution of humerus shapes on the first two CV axes (above) together accounted for 73.7% of between-groups humeral shape variation, while CV-3 and CV-4 (below) together represent the remaining 26.3% of the variation used to distinguish between the five flight-style groups: perch-hunting, chasing, hovering, soaring, and low-flight. Based on this result 88.1% of training set species were assigned to their correct flight-style groups on the basis of proximity to the group means. Shape models representing along-axis coordinate positions through the canonical variates space are shown in Figure 10, highlighting morphological features that were particularly important in distinguishing between high- and low-scoring species on each CV axis. Species abbreviations are listed in Appendix 1.
Figure 4 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 4. Steps in the definition of eigensurface sampling grids as exemplified by the three scans of the proximal–dorsal surfaces of the humeri illustrated in Figure 3. The upper row shows the region selected for analysis. Point clouds of approximately 2000–3000 points representing this region were saved as ASCII text files along with separate files recording the boundary outline coordinates, points along a midline, and the coordinate positions of the two landmarks selected to orient the grid. Lower row: eigensurface form sampling grids. Each eigensurface grid is calculated by selecting a grid resolution (e.g. 10, 15, 20) and then interpolating that number of equally spaced semilandmark points along each half-outline (black) and along the surface trace of the chord joining the orientation landmarks (white). In this analysis a grid resolution of 10 was selected and the landmark chord oriented so that it traced the approximate position of the mid-line running from the humerus head down the centre of the shaft. Lateral or 'rib' chords are then drawn along the surface of the form such that each mid-line node is joined to a boundary outline node on either side. Equally spaced rib semilandmarks (grey) were then located along each of these rib chords with the number of semilandmarks used to quantify the shape of the chord being set iteratively as the number required to represent 95% of the length of the most contorted corresponding chord across the entire sample. This iterative procedure is identical to that used by MacLeod (1999) to sample boundary outline form in extended eigenshape analysis. The resulting grids quantify the geometric form of the surface of the humerus using an equal number of semilandmark points for each specimen in the sample and with each point being located in a position that corresponds topologically (relative to the grid point set as a whole) to all other points across the sample.
Figure 2 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 2. Phylogeny of Falconiformes based on Griffiths et al. (2004), Lerner & Mindell (2005), Lerner et al. (2008) and Griffiths et al. (2007). Species are grouped by their ecological or vernacular names. Size of the wedges indicates species richness. Genus or species names of taxa, along with the number of species from each genus included in the study dataset, are indicated after each clade name. Specimens were selected to be representative of overall morphological, ecological, and behavioural diversity within their group. Lineages shown in grey were not included in this investigation.
Figure 3 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 3. Creation of 3D humerus proximal–dorsal surface sampling grids. Upper row: original clouds of scanned points located in xyz space for Falco sparverius (American kestrel, left), an open habitat species that forages using hovering flight; Accipiter cooperii (Cooper's hawk, centre), a forest habitat perch-hunter; and Gyps africanus (white-backed vulture, right), a woodland-dwelling, soaring scavenger. Middle row: adaptive mesh representations of the original point clouds interpolated to 2000–3000 mesh vertices. Lower row: filled and smoothed mesh illustrating the degree of surface detail captured by the surface sampling procedure. Note this is not the level of detail captured and employed in the eigensurface analysis procedure (see Fig. 4). Rather, the lower row figures represent the morphological starting points for eigensurface analysis.
Figure 5 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 5. Ordination of the 50 falconiform humerus surfaces in the space formed by the first three eigensurface axes. When taken together this three-dimensional space accounts for 62.4% of observed surface shape variation. Species abbreviations are given in Appendix 1. Note the strong clustering of taxa into non-phylogenetic groups in the subspace, circled in the figure. The locations of these same specimens in the space formed by the first 21 eigensurface (E-Surf) axes (accounting for 95.4% of observed surface shape variation) were used as a summary of biologically important shape variation for all subsequent analyses. See text for discussion.
Figure 11 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 11. Ordination of the falconiform species for which foraging habitat information was available (34 species) within the space of the first two canonical variates axes of 18 eigensurface shape variables. Based on this result 91.9% of training set species were assigned to foraging habitat groups correctly on the basis of proximity to the group means; however, a likelihood ratio test showed that there was a 15.6% chance that this result could have been achieved using a dataset that lacked subgroup structure, and a cross-validation test could only accurately assign 55.6% of species to the correct habitat group. Rows of shape models below the ordination plot represent along-axis coordinates through the canonical variates space for CV-1 calculated using the method of MacLeod (2007). Although differences between the models were extremely subtle, in higher scoring specimens the bicipital crest (BC) extends slightly further distally towards the shaft and the bicipital surface is slightly flatter. Note the CV-2 axis contains no information with regard to group discrimination and should not be interpreted. Species abbreviations are listed in Appendix 1.
Figure 10 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 10. Shape models representing along-axis trajectories through the canonical variates space for the CVA of flight style [CV-1 (first row), CV-2 (second row), CV-3 (third row) and CV-4 (fourth row)]. Models were calculated using the method of MacLeod (2007). Detailed inspection of the CV-1 models revealed that low scoring hovering taxa had humeri with larger, more pointed deltoid crests (DC), more rounded bicipital crests (BC) and more distinct bicipital furrows (BF); in higher scoring soaring taxa the humerus is more slender with a flatter appearance, the humeral head (H) is more domed and the external tuberosity (ET) is in a more proximal position. The CV-2 axis represented a shift between chase-hunting, perch-hunting, and low-flying species. From the CV-2 models it is clear that higher scoring taxa have more robust humeri with a thicker shaft (S), larger DC and BC. In specimens that have a lower score on CV-3 (which tended to be perch-hunters), the distal portion of the deltoid crest (DC distal) is larger than in higher scoring specimens, which have smaller DCs and less defined BFs. A high score on CV-4 is indicative of a flatter bicipital surface and a smaller DC (particularly the proximal portion) that extends further down the shaft.
Figure 7 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 7. Results of a CVA for the original 20 eigensurface variables (A and B), and a projection of the original data into a space formed by the eigenvector decomposition of the covariance matrix of the standardized contrasts between internal nodes of the cladogram in Figure 2 as modelled by the phylogenetically independent contrasts method (C and D, see text for discussion). Note the well-defined lineage-group separation achieved by both analyses and the overall similarities in lineage-group placements relative to one another. The fact that highly structured lineage-specific differences in shape variation remain part of the system even after phylogenetic contrasts have been removed strongly suggests that the dominant shape variation factor(s) being expressed in the eigensurface space cannot be accounted for under a simple model of phylogenetic covariation. See text for discussion.
Figure 12 in Eigensurface analysis, ecology, and modelling of morphological adaptation in the falconiform humerus (Falconiformes: Aves)
Figure 12. Ordination of the falconiform species for which migratory behaviour information was available (32 species) within the space of the first two canonical variates axes of ten eigensurface shape variables. Based on this result 90.6% of training set species were assigned to migratory behaviour groups correctly on the basis of proximity to the group means. Rows of shape models below the ordination plot represent along-axis coordinates through the canonical variates space for CV-1, calculated using the method of MacLeod (2007). In high-scoring taxa the external tuberosity (ET) is more prominent and other protrusions may be noted around the humeral head (H), while in lower scoring taxa the humeral head has a smoother, more rounded appearance. See text for further discussion. Note the CV-2 axis contains no information with regard to group discrimination and should not be interpreted. Species abbreviations are listed in Appendix 1.
Systematic Review on the Research Topic "Learning Ecologies" - Dataset and Analysis
<p>The concept of learning ecologies (Barron, 2004, 2006; Williams, 2011) emerged in a context of educational change. In such context, there was emphasis on searching models and applications facing the new forms of learning as continuum from structured, formal spaces to fluid, informal spaces, with the support of digital technologies (Sangra, Gonzalez-Sanmamed, & Guitert, 2013; Tabuenca, Ternier, & Specht, 2013).</p> <p>While the construct “learning ecologies” has offered a broad semantic space to characterize innovative ways of learning, it is also true that its potential to promote innovative educational interventions could have been hindered by its same broadness. According to this assumption, the authors have carried out a systematic review of the literature with the aim of analyzing a) the several definitions given to the concept, encompassing the underlying ontological perspective on the phenomena studied; b) the methodological approaches adopted to study the phenomenon; c) the applications of the research on this topic. Throughout this analysis, the authors attempt to represent the criticalities of the existing research, as well as the potential areas of development with fruitful alignment of the theoretical/ontological issues, the methodological approaches and the educational applications.</p> <p>The current dataset introduces all the stages of data analysis: from the 337 articles identified (covering the period 1991-2018, containing the key term “learning ecolog*” and selected from 5 relevant scientific databases in the area of education: SCOPUS, ISI WOS, DOAJ, EDITLIB, ERIC) to the final group of 84 papers which were analyzed.</p> <p>Each article was coded according to a set of 20 categories developed by the authors on theoretical basis.</p> <p>The dataset presents:</p> <p>A) The Codebook with the categories used to code each article </p> <p>B) The first, raw selection of articles from each database</p> <p>C) The second integrated dataset will the articles merged, without overlaps</p> <p>D) The third final database where the articles were coded; each row reprents an article. Data filters have been applied to facilitate dynamic searches and explore the categories.</p> <p>E) The PRISMA workflow, with the data extracted from A,B,C</p> <p>F) The tables adopted to make the Kappa calculations</p> <p>G) Some pivot tables with data analysis extracted D</p> <p> </p>
Socio-ecological gap analysis to forecast species range contractions for conservation
Conservation requires both a needs assessment and prioritization scheme for planning and implementation. Range maps are critical for understanding and conserving biodiversity, but current range maps often omit content, negating important metrics of variation in populations and places. Here, we integrate a myriad of conditions that are spatially explicit across distributions of carnivores to identify gaps in capacity necessary for their conservation. Expanding on traditional gap analyses that focus almost exclusively on quantifying discordance in protected area coverage across a species' range, our work aggregates threat layers (e.g., drought, human pressures) with resources layers (e.g., protected areas, cultural diversity) to identify gaps in available conservation capacity (ACC) across ranges for 91 African carnivores. Our model indicated that all species have some portion of their range at risk of contraction, with an average of 15 percentage range loss. We found that the ACC differed based on body size and taxonomy. Results deviated from current perceptions of extinction risks for species with an International Union for Conservation of Nature (IUCN) threat status of Least Concern and yielded insights for species categorized as Data Deficient. Our socio-ecological gap analysis presents a geospatial approach to inform decision-making and resource allocation in conservation. Ultimately, our work advances forecasting dynamics of species' ranges that are increasingly vital in an era of great socio-ecological change to mitigate human–wildlife conflict and promote inclusive carnivore conservation across geographies.
A confidence interval analysis of sampling effort, sequencing depth, and taxonomic resolution of fungal community ecology in the era of high-throughput sequencing.
Open the record for dataset details and reuse information.
Data from: Effectiveness of modern leaf analysis tools for the morpho-ecological study of plants: the case of Primula albenensis Banfi et Ferl
Open the record for dataset details and reuse information.
Data from: Quantifying the effects of ecological constraints on trait expression using novel trait-gradient analysis parameters
Open the record for dataset details and reuse information.
Data from: The plover neurotranscriptome assembly: transcriptomic analysis in an ecological model species without a reference genome
Open the record for dataset details and reuse information.
Data from: Genomic analysis of demographic history and ecological niche modeling in the endangered Sumatran Rhinoceros Dicerorhinus sumatrensis
Open the record for dataset details and reuse information.
Data from: Parentage analysis of Ansell's mole-rat family groups indicates a high reproductive skew despite relatively relaxed ecological constraints on dispersal
Open the record for dataset details and reuse information.
Ecological analysis of Pavlovian fear conditioning in rats
Open the record for dataset details and reuse information.
Data from: Ecological niche differentiation in peripheral populations: a comparative analysis of eleven Mediterranean plant species
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.