Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4,276
datasets available to search
ShareScore release 0.9.0
Dataset results
4,276 results for “Estimation”
Dataset for Estimating soil hydraulic properties from oven-dry to full saturation using inverse modeling and shortwave infrared imaging
<p>In this repository, we provide all the datasets that are needed to reproduce the analysis conducted in the paper entitled "Estimating soil hydraulic properties from oven-dry to full saturation using inverse modeling and shortwave infrared imaging."</p> <p><br> codes: This folder contains Python codes to run the forward and inverse modeling. Install the following packages.<br> notebook, fenics, numpy, pandas, matplotlib, scipy, numdifftools, and lmfit for inverse modeling (needs to be run on Linux).<br> data: This directory contains data used in the inverse modeling.<br> gif: This directory contains GIF movies of the upward infiltration experiments.</p> <p>readme.xlsx: This file explains which data are used for each figure in the paper.</p>
Correlation between estimated pulse wave velocity values from two equations in healthy and under cardiovascular risk populations
<p><strong>Introduction </strong><strong>: </strong>Equations can calculate pulse wave velocity (ePWV) from blood pressure values (BP) and age. The ePWV predicts cardiovascular events beyond carotid-femoral PWV. We aimed to evaluate the correlation between four different equations to calculate ePWV.</p> <p><strong>Methods: </strong>The ePWV was estimated utilizing mean BP (MBP) from office BP (MBP<sub>OBP</sub>) or 24-hour ambulatory BP (MBP<sub>24-hBP</sub>). We separated the whole sample into two groups: individuals with risk factors and healthy individuals. The e-PWV was calculated as follows: </p> <p>We calculated the concordance correlation coefficient (Pc) between e1-PWV<sub>OBP</sub> vs e2-PWV<sub>OBP</sub>, e1-PWV<sub>24-hBP</sub> vs e2-PWV<sub>24-hBP</sub>, and mean values of e1-PWV<sub>OBP</sub>, e2-PWV<sub>OBP</sub>, e1-PWV<sub>24-hBP, </sub>and e2-PWV<sub>24-hBP </sub>. The multilevel regression model determined how much the ePWVs are influenced by age and MBP values.</p> <p><strong>Results:</strong> We analyzed data from 1541 individuals; 1374 ones with risk factors and 167 healthy ones. The values are presented for the entire sample, for risk-factor patients and for healthy individuals, respectively. The correlation between e1-PWV<sub>OBP</sub> with e2-PWV<sub>OBP</sub> and e1-PWV<sub>24-hBP </sub>with e2-PWV<sub>24-hBP</sub> was almost perfect. The Pc for e1-PWV<sub>OBP</sub> vs e2-PWV<sub>OBP</sub> was 0.996 (0.995-0.996), 0.996 (0.995-0.996), and 0.994 (0.992-0.995); furthermore, it was 0.994 (0.993-0.995), 0.994 (0.994-0.995), 0.987 (0.983-0.990) to the e1-PWV<sub>24-hBP </sub>vs e2-PWV<sub>24-hBP</sub>. There were no significant differences between mean values (m/s) for e1-PWV<sub>OBP</sub> vs e2-PWV<sub>OBP</sub> 8.98±1.9 vs 8.97±1.8; p=0.88, 9.14±1.8 vs 9.13±1.8; p=0.88, and 7.57±1.3 vs 7.65±1.3; p=0.5; mean values are also similar for e1-PWV<sub>24-hBP </sub>vs e2-PWV<sub>24-hBP</sub>, 8.36±1.7 vs 8.46±1.6; p=0.09, 8.50±1.7 vs 8.58±1.7; p=0.21 and 7.26±1.3 vs 7.39±1.2; p=0.34. The multiple linear regression showed that age, MBP, and age² predicted more than 99.5% of all four e-PWV.</p> <p><strong>Conclusion: </strong>Our data presents a nearly perfect correlation between the values of two equations to calculate the estimated PWV, whether utilizing office or ambulatory blood pressure.</p>
Estimation of parasitic elements of silicon photomultipliers (SiPM)
<p>Project FleX-RAY employed photon counting capable photodiodes in order to capture light that was generated by the scintillation phenomenon, in plastic scintillating fibres. These special photodiodes are called Silicon Photomultipliers, or SiPMs. Electrical simulations were then carried out to evaluate different preamplifier architectures for SiPMs. For these simulations, we had to develop the electrical equivalent of an SiPM, however, many parameters that are necessary to develop an accurate model cannot be found in product datasheets or literature. This dataset contains electrical measurements and calculations that were conducted during the project, to estimate the values of various parasitic parameters of SiPMs available in the market.</p> <p>Specifically, the datasets contain Current vs Voltage (I-V) curves and Capacitance vs Electrical Conductance (Cp-G) curves that were used to extract the following parasitic parameters: quench resistance Rq, paralleled lumped capacitance Cm and conductance Gm. After the value of these parameters had been measured, capacitances Cq, Cd and Cg were mathematically derived.</p> <p>Two spreadsheets are included in this dataset:</p> <ol> <li>Spreadsheet titled "SiPM_I-V_curves.xlsx" contains measured Current vs Voltage (I-V) data, and derived Rq (quench resistance data), for the devices listed below.</li> <li>Spreadsheet titled "SiPMs_GvsCp.xls" contains the measured Conductance vs Parallel Capacitance (G-Cp) data, and derived Cq, Cd and Cg capacitance data, for the devices listed below.</li> </ol> <p>Devices under investigation: Hamamatsu SiPM models S12572-010, S12571-015, S13360-3075CS, S13360-3050CS, S13360-1375CS, S13360-1350CS and ON-semi SiPM models microFJ-30035, microFC-10035</p> <p>Measurement device(s)/board(s): Keysight Technologies 34401A Bench Digital Multimeter, Agilent 4294A Impedance analyzer, Generic bench-top power supplies</p> <p> </p> <p>This work was financed by the European Union's Horizon 2020 program under grant agreement No. 899634.</p>
A detectable change in the air-sea CO2 flux estimate from sailboat measurements
<p>This repository contains files and scripts used to generate figures for the paper titled "A detectable change in the air-sea CO2 flux estimate from sailboat measurements". The study quantifies the impact of pCO2 observations measured by the sailboat "Seaexplorer" on the air-sea CO2 flux estimate.</p><p><strong> Overview:</strong></p><p>We used pCO2 measurements sourced from SOCAT (www.socat.info), along with other environmental variables. We applied the 2-step neural network method SOM-FFN (Landschützer et al., 2013) to reconstruct air-sea CO2 flux estimates.</p><p>Four sets of air-sea CO2 flux estimates were reconstructed, each with 40 ensemble members to account for random errors in the neural network. These are the four sets:</p><p>E1) fluxesA - Based on SOCATv2022 including Seaexplorer data</p><p>E2) fluxesB - Based on SOCATv2022 excluding Seaexplorer data.</p><p>E3) fluxesC - Based on SOCATv2022 data, including Seaexplorer data, but introducing a random uncertainty of ± 5 μatm to the Seaexplorer data.</p><p>E4) fluxesD - Based on SOCATv2022 data, including Seaexplorer data, but introducing a constant measurement offset of 5 μatm to the Seaexplorer data.</p><p>These air-sea CO2 flux density estimates are 4-dimensional, represented in mol C m-2 yr-1, with the following dimensions:</p><p>- Ensemble size of flux reconstructions (40)</p><p>- Time (months from 1982 to 2021, totaling 480 months)</p><p>- Latitude (1-degree intervals, totaling 180 latitudes)</p><p>- Longitude (1-degree intervals, totaling 360 longitudes)</p>
Tractography derived quantitative estimates of tissue microstructure depend on streamline length: A characterization and method of adjustment.
<p>In respect of the brain imaging files upon which these analyses are based, three participants provided consent for their exemplar, pseudo-anonymised, data to be placed in the public domain. The example R code can be used to analyse these data.</p>
CoUDlabs_TA_USFD_02_ANNULAR_Regueiro. Time series analysis of sewer temperatures in an annular flume to estimate sediment accumulation
<p>This dataset contains the results of the experimental campaign and how data were collected on the the <a href="https://co-udlabs.eu/">Co-UDlabs</a> Transnational Access project: <em>Temperature time series analysis for predicting sedimentation in sewer systems</em>, by Regueiro-Picallo et al. The Transnational Access project was funded under the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101008626.</p> <p>The experiments were designed to further develop an innovative methodology for measuring sediment bed deposits in UDS based on temperature data analysis (<a href="https://doi.org/10.1039/D2EW00820C" target="_blank" rel="noopener">Regueiro-Picallo et al., 2023</a>; <a href="https://doi.org/10.1039/D3EW00825H" target="_blank" rel="noopener">Regueiro-Picallo et al., 2024</a>). Particularly, the aim of these experiments was to study the influence of the sewer hydrodynamics for estimating the sediment accumulation using temperature-based methods. Therefore, the main tasks of this project were the design of a temperature-control system for the ANNULAR flume to reproduce sewer temperature patterns, and the development of an experimental campaign including different flow, sediment depth and temperature pattern conditions. The purpose of these measurements is to prove the use of simplified systems to monitor sediment accumulation in sewer systems.</p> <p>The data are described so that others can use and reproduce.</p>
Figure 5 in Multivariate analysis of neognath skeletal measurements: implications for body mass estimation in Mesozoic birds
Figure 5. Box plots with whiskers showing the variation among locomotion modes of percentage prediction errors (%PE) for the multiple regression analysis (MR; grey) and the single regression analysis (SR; white) equations adjusted in modern birds. Box length shows the interquartile range (25th and 75th percentiles). The horizontal line within boxes indicates the median. Vertical lines show the 5–95% confidence limits. Points indicate values outside these limits (i.e. outliers). Black horizontal lines between the grey and white boxes show the %PE estimates obtained with the equation based on humeral length (HL), the osteological variable less affected by ecological groupings (as shown by its lower F-statistic values; see Tables 6 and 7). %PE values greater than zero indicate an underestimation and %PE values lower than zero indicate an overestimation. A, %PE variation with respect to groups of aerial locomotion. Abbreviations: CF, continuous flapping; FG, flapping and gliding; FB, flapping and bounding; S, soaring. B, %PE variation with respect to groups of non-aerial locomotion. Abbreviations: A, aquatic; TG, terrestrial ground-dwelling; TN, terrestrial non-ground-dwelling; ATG, aquatic and grounddwelling; TGN, perching and ground-dwelling.
Figure 1. Calibrated phylogeny for the main avian taxa. Tree topology was obtained from O in Multivariate analysis of neognath skeletal measurements: implications for body mass estimation in Mesozoic birds
Figure 1. Calibrated phylogeny for the main avian taxa. Tree topology was obtained from O'Connor, Chiappe & Bell (2011) and divergence times are based on a 'literal' interpretation of the fossil record from Brockelhurst et al. (2012). Taxa abbreviations: Nth, Neornithes; Orph, Ornithuromorpha; Orn, Ornithothoraces; Orth, Ornithurae; Pyg, Pygostylia.
Figure 4 in Multivariate analysis of neognath skeletal measurements: implications for body mass estimation in Mesozoic birds
Figure 4. Biplots used in the selection of four variables for each fossil group of Mesozoic birds: humeral length (HL), femoral length (FL), diaphyseal craniocaudal width of ulna (dUW), and diaphyseal craniocaudal width of femur (dFWcc). Each predictor variable was plotted against a combination of the 14 remaining variables used for estimating body mass (BM; Table S3). The biplots show the regression line fitted for extant birds (grey circles) with the 95% confidence intervals for BM predictions (dotted lines). Following the procedure of selection of variables (see text), HL and FL were used for generating functions that can be applied to all fossil avian taxa. In contrast, dUW and dFWcc could not be incorporated into the functions adjusted for estimating BM in Archaeopterygidae and Enantiornithes, respectively.
Figure 3 in Multivariate analysis of neognath skeletal measurements: implications for body mass estimation in Mesozoic birds
Figure 3. Effects of weighting for the best-fitting multiple regression equation obtained from the modern data set (see Table 2). A, distribution of familiar residuals for unweighted data, and for data weighted by families. Each box plot with whiskers represents one family. Box length shows the interquartile range (25th and 75th percentiles). Horizontal lines indicate the 5–95% confidence limits. Asterisks show outliers. Abbreviations for families: Ac, Accipitridae; Ad, Alcedinidae; Ae, Aegothelidae; Al, Alcidae; An, Anatidae; Ap, Apodidae; Ar, Ardeidae; At, Artamidae; Au, Alaudidae; Ca, Caprimulgidae; Cc, Cacatuidae; Ch, Charadriidae; Ci, Ciconiidae; Co, Columbidae; Cn, Cinclidae; Cr, Coraciidae; Ct, Catharthidae; Cu, Cuculidae; Cv, Corvidae; Di, Diomedeidae; Fa, Falconidae; Fg, Fringillidae; Fr, Fregatidae; Ga, Gaviidae; Gr, Gruidae; He, Hemiprocnidae; Hi, Hirundinidae; La, Laridae; Ln, Lanidae; Me, Meleagridae; Mg, Megapodidae; Mo, Motacillidae; Mp, Meropidae; Ms, Musophagidae; Mu, Muscicapidae; Ot, Otididae; Pa, Paridae; Pc, Pelecanoididae; Pd, Podicipedidae; Pe, Pelecanidae; Ph, Phasianidae; Pic, Picidae; Pit, Pittidae; Pl, Phalacrocoracidae; Pn, Pandionidae; Po, Podargidae; Pr, Procellaridae; Ps, Psittacidae; Pt, Pteroclidae; Pu, Prunellidae; Ra, Rallidae; Re, Recurvirostridae; Ry, Rynchopidae; Sc, Stercoriidae; Sg, Strigidae; So, Scolopacidae; Sr, Sturnidae; St, Sternidae; Su, Sulidae; Sy, Sylviidae, Te, Tetraonidae; Th, Threskiornithidae; Tt, Tytonidae; Tu, Turdidae; Ty, Tyrannidae; Up, Upupidae. B, plot showing the variations of %MPE with the increase of individuals per family. The dashed line represents the unweighted multiple regression analysis (MR) and the grey line represents the weighted MR.
Figure 2 in Multivariate analysis of neognath skeletal measurements: implications for body mass estimation in Mesozoic birds
Figure 2. Illustration of osteological limb measurements used in this study and defined in Table 1: A, cranial aspect of the humerus; B, dorsal aspect of the ulna and the radius; C, dorsal aspect of the carpometacarpus; D, caudal aspect of the femur; E, caudal aspect of the tibiotarsus; F, cranial aspect of the tarsometarsus.
Datasets for "Reconciling global terrestrial evapotranspiration estimates from multi-product intercomparison and evaluation"
<p>Datasets for "Reconciling global terrestrial evapotranspiration estimates from multi-product intercomparison and evaluation"</p>
State of Health Estimation of Lithium-Ion Batteries Based on Electrochemical Impedance Spectroscopy and Backpropagation Neural Network
Open the record for dataset details and reuse information.
Satellite pose estimation - Sentinel 3
<p>blablabla</p>
Rank likelihood-based estimation of low birth weight in Ethiopia
<p>Low birth weight is a significant risk factor associated with high rates of neonatal and infant mortality, particularly in developing countries. However, most studies conducted on this topic in Ethiopia have small sample sizes, often focusing on specific areas and using standard models employing maximum likelihood estimation, leading to potential bias and inaccurate coverage probability. This study used a novel approach, the Bayesian rank likelihood method, within a latent traits model, to estimate parameters and provide a nationwide estimate of low birth weight and its risk factors in Ethiopia. Data from the Ethiopian Demographic and Health Survey (EDHS) of 2016 were used as a data source for the study. Data stratified all regions into urban and rural areas. Among 15, 680 representative selected households, the analysis included complete cases from 10, 641 children. The evaluation of model performance considered metrics such as the root mean square error, the mean absolute error, and the probability coverage of the corresponding 95% confidence intervals of the estimates. Based on the values of root mean square error, mean absolute error, and probability coverage, the estimates obtained from the proposed model outperform the classical estimates. According to the result, 40.92% of the children were born with low birth weight. The study also found that low birth weight is unevenly distributed across different regions of the country. Furthermore, there were significant associations between birth weight and several factors, including the age of the mother, number of antenatal care visits, order of birth and the body mass index as indicated by the average posterior beta values of (β1= -0.269, CI = -0.320, -0.220), (β2= -0.235, CI = -0.268, -0.202), (β3= -0.120, CI = -0.162, -0.074) and (β5= -0.257, CI = -0.291, -0.225). The study showed that the low birth weight estimates obtained from the latent trait model outperform the classical estimates. The study also revealed that the prevalence of low birth weight varies between different regions of the country, indicating the need for targeted interventions in areas with a higher prevalence. To effectively reduce the prevalence of low birth weight and improve maternal and child health outcomes, it is important to concentrate efforts on regions with a higher burden of low birth weight. This will help implement interventions that are tailored to the unique challenges and needs of each area. Health institutions should take measures to reduce low birth weight, with a special focus on the factors identified in this study.</p>
Development of equivalent circuit model for state of power estimation of NMC-based Li-ion cell
Open the record for dataset details and reuse information.
Model Development for State-of-Power Estimation of Large-Capacity Nickel-Manganese-Cobalt Oxide-Based Lithium-Ion Cell Validated Using a Real-Life Profile
Open the record for dataset details and reuse information.
Data from: Estimating bloodstain age in the short term based on DNA fragment length using nanopore sequencer
<p>We used a nanopore sequencer to quantify DNA fragments > 10,000 bp in size and then evaluated their relationship with short-term bloodstain age. Moreover, DNA degradation was investigated after bloodstains were wetted once with water. Bloodstain samples on cotton gauze were stored at room temperature and low humidity for up to 6 months. Bloodstains stored for 1 day were wetted with nuclease-free water, allowed to dry, and stored at room temperature and low humidity for up to 1 week. The proportion of fragments > 20,000 bp in dry bloodstains tended to decrease over time, particularly for fragments > 50,000 bp in size. This trend was modeled using a power approximation curve, with the highest R2 value (0.6475) noted for fragments > 50,000 bp in size; lower values were recorded for shorter fragments. The proportion of longer fragments was significantly reduced in bloodstains that were dried after being wetted once, and there was significant difference in fragments > 50,000 bp between dry conditions and once-wetted. This result suggests that even temporary exposure to water causes significant DNA fragmentation, but not extensive degradation. Thus, bloodstains that appear fresh but have a low proportion of long DNA fragments may have been wetted previously. Our results indicate that evaluating the proportion of long DNA fragments yields information on both bloodstain age and the environment in which they were stored.</p>
Tropical Cyclone Wind Hazard Estimation for the Western North Pacific Basin
<p>Ten-thousand-year worth of synthetic tropical cyclones (TCs) over the western North Pacific (WNP) basin, and the TC wind hazard estimations in terms of return periods for the offshore waters in the WNP basin and 10 coastal cities in China. The dataset was produced in <em>RDS</em> format using the R software. This dataset is used for peer review of the paper submitted to <em>Earth and Space Science</em>. This study was supported, in part, by the National Key R&D Program of China under grant 2022YFC3004200, the Open Grants of the Joint Open Lab on Meteorological Risk and Insurance under grant 2023F002, and the National Natural Science Foundation of China under grant 41875057.</p>
Experiment results for the paper "Uncertainty-Aware Ship Location Estimation using Multiple Cameras in Coastal Areas" to appear in MDM'2024
<p>After decompression, there are 16 folders which corresponding to the 16 multi-camera settings in the paper.</p> <p> </p> <p>Under each folder, there are two files: trajs.csv and trajsGuess.csv.</p> <p> </p> <p>1. trajs.csv contains the trajectories of ships that are located inside the monitored area of the mult-camera setting.</p> <p> The first four columns are MMSI (ship identity), timestamp, lon, and lat.</p> <p> The following columns are the corresponding pixel of the coordinate (lon, lat) in each camera, where (-1,-1) means (lon, lat) is outside the monitored area by a camera.</p> <p> A pixel is a pair of integers. </p> <p> xPos1 and yPos1 are for the 1st camera, and xPos2 and yPos2 are for the 2nd camera, and so on so forth.</p> <p> </p> <p>2. trajsGuess.csv contains the estimated ship locations by using the proposed approach in the paper.</p> <p> There are 6 columns.</p> <p> The 1st column is timestamp.</p> <p> The 2nd column is used to distinguish between the different pixel polygon intersections.</p> <p> The 3rd column and the 4th column can be either a pixel coordinate or a spatial point coordinate in lon/lat.</p> <p> The 5th column is either the cameraID of a pixel, or the order of a boundary point for a spatial polygon. The cameraID starts from 1.</p> <p> The 6th column is the type of the record, which can be</p> <p> pixel,</p> <p> or intersection1 (a polygon),</p> <p> or center1 (center of intersection1),</p> <p> or intersection2 (a polygon),</p> <p> or center2 (center of intersection2).</p> <p> Note that intersection2 and center2 appear rarely in the 6th column.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.