Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
27
datasets available to search
ShareScore release 0.9.0
Dataset results
27 results for “Point Cloud Data”
Point cloud data from terrestrial laser scanning for stem volume modelling of Scots pine trees
<p>Stem volume is a key forest inventory attribute characterizing growth and yield of individual trees and forest stands. Three-dimensional information from terrestrial laser scanning (TLS) can be used to reconstruct tree stems and provide information on stem volume as well as stem shape. We collected diameter at breast height and height information with traditional field measurements as well as preprocessed TLS point cloud data on 230 Scots pine trees (<em>Pinus sylvestris L.</em>) from southern Finland. The data set here includes three-dimensional information on Scots pine tree stems derived from TLS point clouds. The usage of this data set can include, but is not limited to, development of point cloud processing algorithms for single tree stem reconstruction and investigations of of stem volume modelling for Scot pine. </p> <p>This data set includes two files: Scots_pines.txt includes DBH and height information based on field measurements from the 230 Scots pine trees. File includes the following columns: treeID, DBH, and h, where DBH is presented in cm and h (i.e. tree height) in m. Stem_points.zip, on the other hand, includes 230 laz-files where figure in the name of the laz-file refers to the tree ID in Scots_pines.txt-file. Laz-files include three columns that describe x, y, and z, coordinates (in meters) of stem points in a local coordinate system extracted from the normalized TLS point clouds (i.e. z coordinate describes height above ground).</p>
Sila National Park - 3D Point cloud data
<p>This dataset contains 3 types of data.</p> <ul> <li>GPS data (the ones starting with <em>"GPS"</em>) of sampling plot centers collected with a Trimble GPS and post processed to ensure positioning errors lower than 2 meters.</li> <li>TLS data, (the ones starting with <em>"ID_"</em>): such data were collected in the end of August 2019 with a mobile terrestrial laser scanner (mobile ZEB TLS) in a squared area of approximatively 30x30m. Data have been normalized using TreeLS package in R.</li> <li>ALS data collected in the end of July 2019. For the entire study area, we upload 2 different ALS data: "<em>merged.las</em>" is the original point cloud; "<em>myLas_norm_lt22.las</em>" is the normalised point cloud, cut at 22 meters from the ground in order to perform specific analysis (i.e. paper under submission).</li> </ul> <p>Data collection was founded by the <em>AGRIDIGIT Selvicoltura</em> project.</p>
Detailed point cloud data on stem size and shape of Scots pine trees
<p>This data set is comprised of three packed zip files and they include text files of 3D information from terrestrial laser scanning (TLS) and aerial imagery from unmanned aerial vehicle (UAV) from individual Scots pine trees within 27 sample plots from three test sites located in southern Finland.</p> <p>TLS data acquisition was carried out with Trimble TX5 3D laser scanner (Trible Navigation Limited, USA) for all three study sites between September and October 2018. Eight scans were placed to each sample plot and scan resolution of point distance approximately 6.3 mm at 10-m distance was used. Artificial constant sized spheres (i.e. diameter of 198 mm) were placed around sample plots and used as reference objects for registering the eight scans onto a single, aligned coordinate system. The registration was carried out with FARO Scene software (version 2018). Aerial images were obtained by using an UAV with Gryphon Dynamics quadcopter frame. Two Sony A7R II digital cameras were mounted on the UAV in +15° and -15° angles. Images were acquired in every two seconds and image locations were recorded for each image. The flights were carried out on October 2, 2018. For each study site, eight ground control points (GCPs) were placed and measured. Flying height of 140 m and a flying speed of 5 m/s was selected for all the flights, resulting in 1.6 cm ground sampling distance. Total of 639, 614 and 663 images were captured for study site 1, 2, and 3, respectively, resulting in 93% and 75% forward and side overlaps, respectively. Photogrammetric processing of aerial images was carried out following the workflow as presented in Viljanen et al. (2018). The processing produced photogrammetric point clouds for each study site with point density of 804 points/m<sup>2</sup>, 976 points/m<sup>2</sup>, and 1030 points/m<sup>2</sup> for study site 1, 2, and 3, respectively.</p> <p>The sample plots within the three test sites have been managed with different thinning treatments in either 2005 or 2006. The experimental design of the sample plots includes two levels of thinning intensity and three thinning types resulting in six different thinning treatments, namely i) moderate thinning from below, ii) moderate thinning from above, iii) moderate systematic thinning, iv) intensive thinning from below, v) intensive thinning from above, and vi) intensive systematic thinning, as well as a control plot where no thinning has been carried out since the establishment. More information about the study sites and samples plots as well as the thinning treatments can be found in Saarinen et al. (2020a).</p> <p>The data set includes stem points of individual Scot pine trees extracted from the point clouds. More about the method of extraction can be found in Saarinen et al. (2020a, 2020b) and Yrttimaa et al. (2020). The title of the zip file refers to the study sites 1, 2, and 3. The title of the text files includes the information on the test site, the plot within the test site, and the tree within the plot. The text files contain stem points extracted from the TLS point clouds. The columns “x” and “y” contain x- and y-coordinates in a local coordinate system (in meters), in column “h” is the height of each point in meters above ground, and treeID is the tree identification number. The columns are separated by space.</p> <p>Based on the study site and plot number, files from different thinning treatments can be identified by using the information in Table 1 in Saarinen et al. (2020b).</p> <p> </p> <p><strong>References</strong></p> <p>Saarinen, N., Kankare, V., Yrttimaa, T., Viljanen, N., Honkavaara, E., Holopainen, M., Hyyppä, J., Huuskonen, S., Hynynen, J., Vastaranta, M. 2020a. Assessing the effects of stand dynamics on stem growth allocation of individual Scots pines. bioRxiv 2020.03.02.972521. <a href="https://doi.org/10.1101/2020.03.02.972521">https://doi.org/10.1101/2020.03.02.972521</a></p> <p>Saarinen, N., Kankare, V., Yrttimaa, T., Viljanen, N., Honkavaara, E., Holopainen, M., Hyyppä, J., Huuskonen, S., Hynynen, J., Vastaranta, M. 2020b. Detailed point cloud data on stem size and shape of Scots pine trees. bioRxiv 2020.03.09.983973. <a href="https://doi.org/10.1101/2020.03.09.983973">https://doi.org/10.1101/2020.03.09.983973</a></p> <p>Viljanen, N., Honkavaara, E., Näsi, R., Hakala, T., Niemeläinen, O., Kaivosoja, J. 2018. A Novel Machine Learning Method for Estimating Biomass of Grass Swards Using a Photogrammetric Canopy Height Model, Images and Vegetation Indices Captured by a Drone. Agriculture 8: 70. <a href="https://doi.org/10.3390/agriculture8050070">https://doi.org/10.3390/agriculture8050070</a></p> <p>Yrttimaa, T., Saarinen, N., Kankare, V., Hynynen, J., Huuskonen, S., Holopainen, M., Hyyppä, J., Vastaranta, M. 2020. Performance of terrestrial laser scanning to characterize managed Scots pine (<em>Pinus sylvestris</em> L.) stands is dependent on forest structural variation. EarthArXiv. March 5. <a href="https://doi.org/10.31223/osf.io/ybs7c">https://doi.org/10.31223/osf.io/ybs7c</a></p>
Precision viticulture dataset for detailed vineyard mapping composed of geotagged smartphone ground images, phytosanitary status, UAV orthomosaics, 3D point clouds, and RTK GNSS data - Northern Spain, July 2022
<p>This dataset offers a rich multimodal collection of data from vineyards, designed to enhance agricultural research with a focus on vineyard management and disease monitoring. It includes geotagged smartphone ground images in ".7z" format for detailed plant-level analysis, a ".csv" file detailing plants' phytosanitary status for health assessment, UAV-derived 3D Point Clouds and orthomosaics in ".las" and ".tiff" formats for aerial landscape views, and RTK GNSS data in ".shp" format for precise plant geolocations.</p> <p>This dataset can be combined with other datasets to enable a comprehensive view of the vineyards and improve its value:</p> <div> <ul> <li>Ariza-Sentís, Mar, Sergio Vélez, and João Valente. ‘Dataset on UAV RGB Videos Acquired over a Vineyard Including Bunch Labels for Object Detection and Tracking’. <em>Data in Brief</em> 46 (February 2023): 108848. <a href="https://doi.org/10.1016/j.dib.2022.108848">https://doi.org/10.1016/j.dib.2022.108848</a>.</li> <li>Vélez, Sergio, Mar Ariza-Sentís, and João Valente. ‘VineLiDAR: High-Resolution UAV-LiDAR Vineyard Dataset Acquired over Two Years in Northern Spain.’ <em>Data in Brief</em>, October 2023, 109686. <a href="https://doi.org/10.1016/j.dib.2023.109686">https://doi.org/10.1016/j.dib.2023.109686</a>.</li> <li> <div> <div>Vélez, Sergio, Mar Ariza-Sentís, and João Valente. ‘Dataset on Unmanned Aerial Vehicle Multispectral Images Acquired over a Vineyard Affected by Botrytis Cinerea in Northern Spain’. <em>Data in Brief</em> 46 (February 2023): 108876. <a href="https://doi.org/10.1016/j.dib.2022.108876">https://doi.org/10.1016/j.dib.2022.108876</a>.</div> <div> </div> </div> </li> </ul> </div>
Point cloud data sets of real and virtual Chenopodium alba
<p>This data set contains:</p> <p>- 5 annotated point clouds of real Chenopodium alba plants obtained from multi-view 2D camera imaging. Annotations consist of 5 classes: leaf blade, petiole, apex, main stem, branch. .txt files contain both 3D coordinates and annotations. .ply files are also provided for raw 3D point data without annotations.</p> <p>- 24 annotated point clouds of virtual Chenopodium alba that were generated by a L-system simulation program. Annotations consist of 3 classes: leaf blade, petiole, stem. 3D coordinates and annotations are in separated .txt files. </p> <p>These files have been used in a companion paper.</p> <p> </p>
UAV data of post fire dynamics, Quesenbank, Harz, 2022 (orthomosaics, topography, point clouds)
<p>Unoccupied aerial vehicles (UAVs) were used to investigate a burnt forest site situated in the Harz National Park area near the location Schierke, east of the Brocken, called Quesenbank (<a href="https://www.google.com/maps/place/51%C2%B046'07.6%22N+10%C2%B041'30.2%22E/@51.7682386,10.6905312,489m/data=!3m1!1e3!4m5!3m4!1s0x0:0xd8d7f64a3ff9acf1!8m2!3d51.76877!4d10.69173">51.76877 °N, 10.69173 °E</a>) which is a spruce stand stand severely affected by bark-beetle and windfall. Most of the trees are dead such that they provide high fuel loads for potentially occurring wildfires. The small river Wormke crosses the Quesenbank and separates the survey area between a hiking path and the forest stand.</p> <p>During the 12.08.2022, inhabitants reported a <a href="https://www.ndr.de/nachrichten/niedersachsen/braunschweig_harz_goettingen/Waldbrand-im-Harz-Polizei-geht-von-Brandstiftung-aus,waldbrand882.html">fire</a> near Schierke which was quickly contained by the authorities. Two months after the fire, on 13.10.2022, a team of scientists from GAU Göttingen and TU Berlin was accompanied by a National Park representative for investigation. The site was surveyed by using modern UAVs and by sampling soil strata, ash and vegetation. This report will briefly describe UAV-based surveys and the derived data products.</p> <p>For an overview, see the <strong>report </strong>or download the Maps.zip folder.</p> <p> </p> <p><strong>Acknowledgements</strong></p> <p><strong>Projekt ”Postfeuerdynamik auf Brandflächen im Nationalpark Harz”</strong></p> <p>Dr. Simon Drollinger, Georg-August Universität Göttingen</p> <p>Marlene Düngelhoef, Nationalparkverwaltung Harz</p> <p>Thomas Glinka, Nationalparkverwaltung Harz</p>
Leaf and wood classification framework for terrestrial LiDAR point clouds: Simulated data validation dataset
<p>Set of 200 3D point clouds used in the validation of "Leaf and wood classification framework for terrestrial LiDAR point clouds". This dataset is a collection of point clouds simulated by a Monte-Carlo ray tracing (librat) using four 3D tree models from the fourth phase RAMI exercise (Widlowski et al, 2015).</p>
Leaf and wood classification framework for terrestrial LiDAR point clouds: Field data validation dataset
<p>Set of 10 3D point clouds used in the validation of "Leaf and wood classification framework for terrestrial LiDAR point clouds". This dataset is a collection of single trees scanned around the globe, from different biomes (both forest and urban areas), using the Riegl VZ-400 terrestrial laser scanner.</p>
Terrestrial Lidar Point Cloud Data for: Evaporation and condensation dynamics within saturated epiphyte communities in a Quercus virginiana forest
<p><span>Terrestrial lidar scans were captured using a BLK360 scanner (Leica Geosystems, Norcross, GA, USA) which has a range of 0.5 – 45 m and measurement rate up to 680,000 points s<sup>−1</sup> at the high-resolution setting. A georeferenced, 3-D point cloud of the study site was generated from 12 scans, approximately 50 m apart in both horizontal directions. Scans were performed in orientations intended to maximize branch exposure to the scanner and to scan during optimal weather conditions to minimize occlusion of features due to noise or movement generated by wind. Scan co-registration was done in Leica Geosystem’s Cyclone Register 360 software using its Visual Simultaneous Localization and Mapping algorithm (Visual SLAM) and resulted in relatively low overall co-registration error ranging from 0.005-0.009 m. From this study site point cloud, manual straight-line measurements from the ground to the sensors were made using Leica’s Cyclone Register 360 software.</span></p>
Point clouds data "Waterfall height sets the mechanism and rate of upstream retreat"
<p>Point clouds data on the erosion shape of waterfalls in our experiment in the paper "Waterfall height sets the mechanism and rate of upstream retreat".</p>
UAV-based multispectral image data of a tree nursery, Eberswalde, Brandenburg, 2023 (Orthomosaics, DEMs, point clouds)
<p>This data set contains three multispectral surveys conducted with an unoccupied aerial vehicle (UAV DJI M300 RTK) of an oak tree nursery experiment</p> <ul> <li>Date of acquisition: 16.08.2023</li> <li>Location: Tree nursery, Eberswalde, Brandenburg, Germany</li> <li>UAV: DJI M300 RTK with active SAPOS connection</li> <li>Flight altitude above ground level: 30 m, 40 m, 60 m</li> <li>Image Overlap forward/side: 80 % / 80 %</li> <li>Camera: MicaSense Altum multispectral</li> <li>EPSG: 32632</li> </ul> <p>Data products: </p> <ul> <li>Orthomosaic multispectral (Resolution: 1.35 cm, 1.79 cm, 2.65 cm)</li> <li>Orthomosaic RGB</li> <li>Orthomosaic thermal LWIR in pseudo °C according to <a href="https://support.micasense.com/hc/en-us/articles/360022446473-Converting-Altum-Thermal-to-degrees-C-after-processing-in-Agisoft-or-Pix4D">Micasense</a> empirical formula</li> <li>DEM</li> <li>Dense point cloud RGB</li> <li>Spectral indices calculated: NDVI, NDRE</li> <li>Agisoft Report</li> </ul> <p><strong>Acknowledgment:</strong></p> <p><strong>Frank Becker</strong></p> <p>Landesbetrieb Forst Brandenburg</p> <p>Landeskompetenzzentrum Forst Eberswalde (LFE)</p>
Replication data for: Effect of Regional Marine Cloud Brightening Interventions on Climate Tipping Points
<p>Data for reproduction of Hirasawa, H., Hingmire, D., Singh, H., Rasch, P. J., & Mitra, P. (2023). Effect of regional marine cloud brightening interventions on climate tipping elements. Geophysical Research Letters, 50, e2023GL104314. https://doi.org/10.1029/2023GL104314</p> <p>Includes:</p> <ul> <li>Raw monthly 2m temperature (TREFHT) and precipitation (PRECT) data from CESM2 MCB simulations.</li> <li>Ensemble mean data from CESM2 Large Ensemble</li> <li>Tipping point metric timeseries from CESM2 LE Historical and SSP2-4.5 and CESM2 MCB simulations.</li> <li>Jupyter notebook displaying plotting script</li> <li>Scripts showing procedure for computing tipping point metrics</li> <li>CAM6 SourceMod changes to apply cloud droplet number concentration perturbations</li> <li>Top of atmosphere long and shortwave anomalies from fixed sea surface temperature simulations for computing effective radiative forcing</li> </ul>
A Simple Semantic-based Data Storage Layout for Querying Point Clouds
<p>Dataset contains three datasets: SMALL, MEDIUM and LARGE point cloud.</p> <p>Contains Python code which is made up of two files pc_new_semantics.py and paperutils.py</p> <p> </p>
3D Point Cloud Data for LiDAR-based Mobile Robot
<p>LiDAR point cloud data serves as an machine vision alternative other than image. Its advantages when compared to image and video includes depth estimation and distance measurement. Low-density LiDAR point cloud data can be used to achieve navigation, obstacle detection and obstacle avoidance for mobile robots. autonomous vehicle and drones. In this metadata, we scanned over 1400 objects and classified it into 6 groups of object namely, human, cars, motorcyclist, signboard, road divider and others.</p>
Some original, intermediate, and result data in the papar entited "Highway marking extraction and degradation analysis by using MLS point clouds"
<p>Some original, intermediate, and result data in the papar entited "Highway marking extraction and degradation analysis by using MLS point clouds"</p>
Virtual Forest Twins based on Marteloscope point cloud data from different forest ecosystem types and its associated teaching workload
<p>The 8th intellectual output (IO-8) titled "Virtual Forest Twins based on Marteloscope point cloud data from different forest ecosystems type and its associated teaching workload" [of the Erasmus+ project "Virtualization of Forest Studies (Virtual Forests)"] was led by Eberswalde University for Sustainable Development (HNEE) in Eberswalde, Germany. The main objectives of IO-8 were two-fold: (1) the development of an analytical pipeline for the virtualization of real forest stands from selected marteloscope sites into 3D virtual twins, and (2) the preparation of open-access, blended teaching and training materials based on the aforementioned analytical pipeline. Specifically, 3D virtual forest twins were created based on point cloud data derived from UAV-mounted and hand-held terrestrial laser scanning technology, followed by a series of software- and hardware-supported analytical steps, and finally rendered for visualization and presentation. The point cloud data collected represents the first significant product of IO8. All further results and products are compiled into open-source resources for teaching, training and research purposes in higher education and forest science. These include technical guidelines, MSc.-level learning materials available for self-directed study on the project Moodle, and a stand-alone online multimedia tutorial narrated in a published ArcGIS StoryMap. </p>
3D Point Clouds of Trees and Apple Fruit Annotated with Thermal Data
<p>The data set captures four measurements during fruit growth: 06/28/2022 (15:00), 07/12/2022 (15:00), 09/01/2022 (15:00), 09/06/2022 (13:00)</p> <p>Additionally, diurnal courses are provided for three days: </p> <table> <tbody> <tr> <td> <p>Date</p> </td> <td> <p>Time</p> </td> </tr> <tr> <td> <p>09/21</p> </td> <td> <p>07:00, 08:00, 10:00, 12:00, 13:00, 18:00</p> </td> </tr> <tr> <td> <p>09/22</p> </td> <td> <p>07:00, 08:00, 10:00, 12:00, 13:00, 18:00</p> </td> </tr> <tr> <td> <p>10/05</p> </td> <td> <p>06:30, 07:00, 09:00, 10:00, 11:00, 16:00</p> </td> </tr> </tbody> </table> <p> </p> <p>The data set was measured in Blocks (A-D) of trees (T) on apple (A) fruit and is stored as compressed zip files, capturing raw, preprocessed, and manually recorded reference (ground truth) data.</p> <p>1. zip files entitled Raw_YYYY_MM_DD_Block[A-C]-[R, L] for seasonal data and Raw_YYYY_MM_DD_BlockD-[R, L]_Hour__:__ for diel data</p> <p>- raw data of LiDAR 3D point clouds - txt files</p> <p>- raw image data by thermal camera - txt files</p> <p>2. zip files entitled YYYY_MM_DD or DailyAcquisitions:</p> <p>- preprocessed (merged) sensor data of temperature-annotated 3D point clouds of canopies - csv files</p> <p>- preprocessed data, capturing manually segmented point clouds of temperature-annotated fruit - txt files</p> <p>3. Microsoft Excel files entitled References and Weather data:</p> <p>- raw data, representing reference data of fruit - xlsx file</p> <p>- raw data of weather conditions - xlsx file</p>
Graph-based Leaf–Wood Separation Method for Individual Trees Using Terrestrial Lidar Point Clouds: Labeled validation data
<p>Set of 10 manually labeled point clouds used in the performance assessment of "Graph-based Leaf–Wood Separation Method for Individual Trees Using Terrestrial Lidar Point Clouds". This dataset is a collection of single trees scanned from different regions covering tropical, temperate, and boreal species—with heights ranging from 5.4 to 43.7 m, using the Riegl VZ-400 and Leica ScanStation C10 terrestrial laser scanner. These data have been preprocessed. For the original data, see https://doi.org/10.5061/dryad.10hq7;<br> https://doi.org/10.5061/dryad.np5hqbzp6;<br> https://doi.org/10.1594/PANGAEA.942856.</p>
Multiway Registration Capability Study in Increasing the Accuracy of Registration Results for Infrastructure and Mining Pits Terrestrial Laser Scanner (TLS) Data Point Cloud
<p>This material has presented on 2nd International Conference on Advanced Research in Engineering and Technology in October 25, 2023.</p>
Data for: UK redwoods terrestrial laser scanner point clouds
<p class="MsoNormal">Giant redwoods (<em>Sequoiadendron giganteum) </em>are some of the UK's largest trees, despite only being introduced in the mid-19th century. Given recent interest in planting redwoods in the UK, partly due to their carbon sequestration potential and also their undoubted public appeal, an understanding of their viability is important. However, little or no research has been conducted to quantitatively estimate their carbon uptake in UK conditions. We used 3D terrestrial laser scanning (TLS) to make detailed structure measurements of individual <em>S. giganteum</em> trees at three sites, to estimate aboveground biomass (AGB) and annual biomass accumulation rates. We show that UK-grown <em>S. giganteum</em> can sequester carbon at a rate of 80 - 100 kg C year<sup>-1</sup>, varying with climate, management and age. This accumulation rate is 2.5 and 20 times faster than commonly-grown UK plantation tree species. We develop new UK-specific allometric models for <em>S. giganteum</em>which fit observed AGB with r<sup>2</sup> > 0.93 and bias < 2% and can be used to estimate <em>S. giganteum</em> AGB more generally. <em>S. giganteum</em> appears to represent a small but potentially important addition to the UK's carbon sequestration efforts and this work provides a baseline for estimating their longer term AGB and carbon sequestration capacity.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.