Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,206
datasets available to search
ShareScore release 0.9.0
Dataset results
3,206 results for “property (T)”
Supplementary material to 'Exotic Symmetry Breaking Properties of Self-Dual Fracton Spin Models'
<p>I. GENERAL INFORMATION</p> <p>1. Title<br>Dataset of "Degeneracy and Scaling Properties of Self-Dual Fracton Spin Models"</p> <p>2. Author Information<br> <br>Giovanni Canossa [1,2], Lode Pollet [1,2], Miguel A. Martin-Delgado [3,4], Hao Song [5], and Ke Liu [1,2,6,7]<br>1. Arnold Sommerfeld Center for Theoretical Physics, University of Munich</p> <p>2. Munich Center for Quantum Science and Technology (MCQST)</p> <p>3. Departamento de Física Teórica, Universidad Complutense, 28040 Madrid, Spain</p> <p>4. CCS-Center for Computational Simulation, Universidad Politécnica de Madrid, Spain</p> <p>5. CAS Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, China</p> <p>6. Hefei National Research Center for Physical Sciences at the Microscale, University of technology of China</p> <p>7. Shanghai Research Center for Quantum Science and CAS Center for Excellence in Quantum Information and Quantum Physics, University of Science and Technology of China</p> <p>Links to publications that cite or use the data:<br>TBA</p> <p>II. Files</p> <p>1. Convention</p> <p>Datas from the multicanonical MC simulations are stored in "Tetra-Ising" and "Fractal-Ising" folders.</p> <p>Lattice size: Each subfolder is named "L=value" where value denotes the linear system size.</p> <p>Multicanonical weights: Files "g_init_T=value.data" contains the set of log(weights) at a given temperature and lattice size, derived from the iterative weight-learning procedure.</p> <p>Datas: HDF5 files "name.out.h5" contain the results of the multicanonical MC simulation at a given lattice size.</p> <p><br>III. Data in HDF5 file</p> <p>1. Convention</p> <p>The results obtained at each temperature point is stored in a separate subdirectory of the .out.h5 file. Each of these subdirectories contains:</p> <p>Energy_Hist: normalized energy histograms obtained from the multicanonical MC simulation (unweighted)</p> <p>Energy_Hist_rw: normalized reweighted energy histograms. For each bin, Energy_Hist_rw[i] = Energy_Hist[i] * e**g[i] / norm, where norm = sum( Energy_Hist[i] * e**g[i] ).</p> <p>c: 1/norm. Gives an estimate of the ratio Z_muca/Z_ca.</p> <p>g: vector containing the weights used for the multicanonical MC simulation at that specific temperature. These are derived from reweighting the weights in "g_init_T=value.data" file.</p> <p>Energy, Energy_Susc, Energy_Kurt Q_x, Q_x_Susc, Q_x_Kurt: canonical expectation value of each relevant observables, along with their susceptibilities and Kurtosis, obtained by reweighting each measurement taken during the simulation by the appropriate weight. (NB: Energy and Q_x need to be multiplied by C in order to give the correct canonical expectation value.)</p> <p><br>2. Relevance</p> <p>These data reproduce Figs. 5 & 6 in the manuscript.</p> <p><br>III. Finite size scaling</p> <p>1. Convention</p> <p>All estimated transition temperatures with their respective uncertainties are stored in "fitting_Tetra" and "fitting_Fractal" folders in the fittemps.txt file.</p> <p>2. Relevance</p> <p>These data reproduce Figs. 3 & 4 in the manuscript.<br> </p> <p> </p>
Flowfield Properties for Calculating Electrical Conductivity in a CO2 Atmosphere
<p>This dataset provides flowfield quantities necessary to calculate the electrical conductivity in the flowfield around an entry vehicle in a CO2 atmosphere. The CFD data was generated using the Data Parallel Line Relaxation Code. The freestream conditions cover velocities from 5 - 12 km/s and altitudes from 20 - 80 km at Mars (85 - 115 km at Venus). The vehicle geometry is a 10 m diameter 70 deg spherecone.</p>
Data Sets for Evaluation of the Psychometric Properties and Validity of the German Version of the Process Model of Emotion Regulation Scale (PMERQ)
<p>Data files relate to an investigation of the psychometric properties of the German Version of the Process Model of Emotion Regulation Scale (PMERQ). Data set 1 (pmerq_1) contains information regarding the age, gender, ethnicity, and educational status of participants. In addition, responses to the 45 items of the initial translation of the 10-scale PMERQ are included. Data set 2 (pmerq_2) contains identical sociodemographic variables and responses to the 45 items of the revised translation of the 10-scale PMERQ. In addition, data set 2 contains responses to the 16-item German Interpersonal Emotion Regulation Questionnaire (IERQ), the 10-item German Emotion Regulation Questionnaire (ERQ), , the German version of the 10-item Big Five Inventory-10 (BFI-10), the 4-item German version of the Patient Health Questionnaire-4 (PHQ-4), the German version of the Satisfaction with Life Scale (SWLS), and the 17-item German Social Desirability Scale-17 (SES-17). Data set 2 (pmerq_2) contains identical sociodemographic variables and responses to the 45 items of the readability-improved translation of the 10-scale PMERQ. In addition, data set 2 contains responses to the German version of the Satisfaction with Life Scale (SWLS) and the German version of the 9-items UCLA Loneliness Scale (UCLA).</p>
Exploring Beneficial Properties of Haskap Berry Leaf Compounds for Gut Health Enhancement
<p>Data and the publication to which they are related</p>
Comprehensive study of antimicrobial polycaprolactone/clay nanocomposite films: preparation, characterization, properties and degradation in simulated body fluid
<p>Even though the biodegradability of polycaprolactone (PCL) and its nanocomposites is lower compared to other biodegradable polyesters, this property and good biocompatibility are used for development of materials for drug delivery with a long-term effect. We prepared novel PCL/clay nanocomposite films with antimicrobials chlorhexidine (CH) or octenidine (OCT) combined with ZnO anchored on vermiculite (VER). The intercalation of CH and OCT into the interlayer of VER/ZnOVER was confirmed by XRD, FTIR and SEM. The organically modified nanofillers compared to VER (−46.0 mV) or ZnOVER (−34.9 mV) showed a positive ζ-potential (+30.7 mV (VER_CH), +21.9 mV (VER_OCT), +24.6 mV (ZnOVER_CH)) indicating a relatively stable materials, except ZnOVER_OCT (+8.6 mV), which strongly agglomerated.</p> <p>Thin PCL/clay films were prepared by solvent casting method and the effect of used nanofillers on structural, thermal, mechanical and antimicrobial properties followed by degradation under hydrolytic conditions was studied. The results showed that presence of ZnO significantly decreases thermal and mechanical stability. The nanofillers with the higher hydrophilic character are responsible for the fastest degradation of PCL matrix. Films possessed high antimicrobial efficiency in long time intervals, hence these nanocomposites open new avenues for the possible application of such materials for the drug delivery with a long-term effect.</p>
Dataset for Article "On the experimental properties of the TS defect in 4H-SiC"
<p>This dataset contains raw data as well as evaluation scripts to the manuscript "On the experimental properties of the TS defect in 4H-SiC".</p>
Transport properties of doped wide band gap layered oxychalcogenide semiconductors Sr2GaO3CuCh, Sr2ScO3CuCh and Sr2InO3CuCh (Ch = S or Se)
<p>The structural, electrical, and optical properties of a series of six layered oxychalcogenides with general formula Sr<sub>2</sub><em>M</em>O<sub>3</sub>Cu<em>Ch</em> where <em>M</em> = Ga, Sc, or In and <em>Ch</em> = S or Se have been investigated. From this set we report the structure and properties of Sr<sub>2</sub>GaO<sub>3</sub>CuSe for the first time, as well as the full structural details of Sr<sub>2</sub>ScO<sub>3</sub>CuSe, which have not previously been available. A systematic study of the suitability of all the Sr<sub>2</sub><em>M</em>O<sub>3</sub>Cu<em>Ch</em> phases as <em>p</em>-type conductors has been carried out, after doping with both sodium and potassium to a nominal composition of <em>A</em><sub>0.05</sub>Sr<sub>1.95</sub><em>M</em>O<sub>3</sub>Cu<em>Ch</em>, (<em>A</em> = Na or K), to increase the hole carrier concentration. Density functional theory calculations were used to determine the electronic band structure and predict the transport properties, while optical properties were determined using UV-vis spectroscopy, and structures confirmed using Rietveld refinement against powder X-ray diffraction data. Room temperature conductivity measurements were carried out on both pristine samples and doped samples, eighteen compositions in total, using four-point probe measurements. We found that the most conductive sample wasK<sub>0.05</sub>Sr<sub>1.95</sub>GaO<sub>3</sub>CuSe, with a measured conductivity of 0.46 Scm<sup>−1</sup>, collected from a sintered pellet. We have also been able to identify a relationship between the conductivity and the geometry of the copper chalcogenide layer within the Sr<sub>2</sub><em>M</em>O<sub>3</sub>Cu<em>Ch</em> series of compounds. As this geometry can be controlled through the material composition, the identification of this structure-property relationship highlights a route to selection and identification of materials with even higher conductivities.</p> <p> </p> <p>This repository contains the computational research data generated for *Transport properties of doped wide band gap layered oxychalcogenide semiconductors Sr2GaO3CuCh, Sr2ScO3CuCh and Sr2InO3CuCh (Ch = S or Se).</p> <p> </p> <p>## Folder Architecture</p> <p>The folders contain the structures relaxed with hybrid functionals (HSE06), the band structure and the uniform DOS and AMSET calculations for each system.</p> <p> </p> <p> </p>
Electronic and optical properties of computationally Predicted Na-K-Sb crystals
<p>This is the dataset for the identically-named paper "Electronic and optical properties of computationally predicted Na-K-Sb crystals".</p> <p>This dataset contains output files from exciting for the two considered polymorphs: hexagonal Na2KSb (hNa2KSb.zip) and cubic NaK2Sb (cNaK2Sb.zip). Inside each zip file contains:</p> <ul> <li>INFO.OUT, INFOXS.OUT, GW_INFO.OUT, INFO_SCR.OUT</li> <li>Lattice-optimised input.xml files for both crystals</li> <li>BAND_Sxx_Ayyyy.OUT files for projected bandstructures</li> <li>PDOS_Sxx_Ayyyy.OUT files for projected density of states</li> <li>BAND.OUT, BANDLINES.OUT, BAND-QP.OUT, IDOS.OUT and TDOS/TDOS-QP.OUT for DOS</li> <li>EFERMI.OUT and EIGVAL.OUT</li> <li>EPSILON files from the dielectric tensor with/without the TDA and IQPA</li> <li>EXCITON files from the dielectric tensor with/without the TDA and IQPA</li> <li>KPATH files for considered excitons with the TDA</li> </ul>
Observable and ionizing properties of star-forming galaxies with very massive stars and different IMFs
<p>Predicted, observable and ionizing properties of star-forming galaxies with very massive stars and different IMFs.</p> <p>The dataset includes the results from the models described in Table 1 of Schaerer+2024 (https://ui.adsabs.harvard.edu/abs/2024arXiv240712122S/abstract) and additional models.</p>
Investigation of two-dimensional radio-frequency sheath properties using a microscale fluid model
<p>In previous work (Kohno H. and Myra J.R. 2023 Comput. Phys. Commun. 291 108841), we developed a numerical scheme based on a two-dimensional microscale radio-frequency (RF) sheath model with periodically curved wall boundaries. Here, we expand the capability of this scheme through modification of the boundary conditions (BCs) on the conducting walls, which allows the ion flow to turn back to the plasma at locations on the walls where the electromagnetic force on the ions is reversed from its usual direction. Numerical simulations are carried out to investigate the dependences of the surface-integrated admittances on the wall bump height, ion magnetization, ion mobility, and the magnetic field angle, and to visualize the sheath structures in several cases. One of the main results is the ion cyclotron admittance resonance observed under the condition of low ion mobility (high normalized frequency). It is shown that the amplitude of the resonance peak depends on the wall bump height and the ion velocity is reversed on the sides of the bump in an RF cycle for the resonance cases. Furthermore, the differences in the admittances between the one- and two-dimensional microscale models are assessed for the purpose of understanding non-locality of the sheath near the wall surface for the parameters considered in this study. This information will be essential for improving the sheath BC for macroscale calculations in the future.</p>
data supporting ''Tuning the mechanical properties of organophilic clay dispersions: Particle composition and preshear history effects''
Open the record for dataset details and reuse information.
Not all Heterogeneity is Equal: Length Scale of Frictional Property Variation as a control on Subduction Megathrust Sliding Behavior
<p>The folder SSS_Results.zip contains the following files:</p> <p>1) A .txt for each simulation that contains (1st column) simulated timestep in seconds; (2nd column) maximum slip velocity at each timestep in m/s; and (3rd column) maximum slip velocity taken from the center of the velocity-strengthening blocks in m/s at each time step.</p> <p>2) A .mat file for each simulation that contains the same output as the .txt file, and in addition a MATLAB structure 'p' that serves as an input file to run each simulation using RSFaultZ, found at <a href="https://github.com/rmskarbek/RSFaultZ">https://github.com/rmskarbek/RSFaultZ</a></p> <p>3) PartialStabilityData.mat - results from linear stability analysis.</p> <p>4) ReducedArchiveData.m, SSS_Fig3.m, SSS_Fig4.m - Three MATLAB scripts that will automatically generate figures 3 and 4 in the related paper. </p> <p>NOTE: SSS_Fig3.m uses a perceptually uniform color map that requires an additional MATLAB package: <a href="https://www.mathworks.com/matlabcentral/fileexchange/68546-crameri-perceptually-uniform-scientific-colormaps">https://www.mathworks.com/matlabcentral/fileexchange/68546-crameri-perceptually-uniform-scientific-colormaps</a></p> <p>For any additional information please do not hesitate to contact the corresponding author Rob Skarbek at rskarbek@psi.edu.</p> <p>Additional MATLAB scripts that will reproduce the simulations themselves can be found at <a href="https://github.com/rmskarbek/RSFaultZ/tree/main/examples/blocks">https://github.com/rmskarbek/RSFaultZ/tree/main/examples/blocks</a></p>
Raw data collection for the publication P. Pötschke, T. Villmow, B. Krause and B. Kretzschmar, Influence of Twin-screw Extrusion Conditions on MWCNT Length and Dispersion and Resulting Electrical and Mechanical Properties of Polycarbonate Composites
<p>This data collection contains the raw data for the publication <br>Petra Pötschke, Tobias Villmow, Beate Krause and Bernd Kretzschmar, Influence of Twin-screw Extrusion Conditions on MWCNT Length and Dispersion and Resulting Electrical and Mechanical Properties of Polycarbonate Composites, <strong>polymers </strong>2024, 16(19), 2694. <a href="https://doi.org/10.3390/polym16192694">https://doi.org/10.3390/polym16192694</a></p> <p>The data are sorted according to the figures and tables in which they are used.</p> <p>The description in Table 1 is taken from the reference:<br>Villmow, T.; Kretzschmar, B.; Pötschke, P. Influence of screw configuration, residence time, <br>and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites. Compos. Sci. Technol. 2010, 70, 2045-2055. doi: https://doi.org/10.1016/j.compscitech.2010.07.021.</p> <p>Figure 15 is adapted from the references:<br>Krause, B.; Boldt, R.; Pötschke, P. A method for determination of length distributions of multiwalled carbon nanotubes before and after melt processing. Carbon 2011, 49, 1243-1247, https://doi:10.1016/j.carbon.2010.11.042.<br>and<br>Liebscher, M.; Domurath, J.; Krause, B.; Saphiannikova, M.; Heinrich, G.; Pötschke, P. Electrical and melt rheological characterization of PC and co-continuous PC/SAN blends filled with CNTs: Relationship between melt-mixing parameters, filler dispersion, and filler aspect ratio. Journal of Polymer Science Part B: Polymer Physics 2018, 56, 79-88, https://doi:10.1002/polb.24515.<br>The data are reused with permissions. </p> <p>The raw data (TEM images) used for the calculation of the carbon nanotube length distributions and mean carbon nanotube length values shown in Figs. 4, 11, 13, 16, and 17 are publically available at: Krause, B. (2024). Transmission electron microscopy (TEM) images of multiwalled carbon nanotubes (MWCNT) detached from polycarbonate (PC) composites [Data set]. Zenodo. https://doi.org/10.5281/zenodo.11400466</p> <p>Version v2:</p> <p>Compared to the submitted figure, in the final version in<strong> Fig. 9 </strong>the sample using the side feeder (PC-H-05) was removed and two samples extruded at 15 kg/h and 750 rpm (PC-H-25) and 1000 rpm (PC-H-26) were added. In the text-file the unit of GPa for the elastic modulus was corrected to MPa. </p> <p>Compared to the submitted Table, in the final version of <strong>Table 2 </strong>the electrical resistivity values were given in more detail including the standard deviation. The column title of sigma break was changed to sigma max, which is more correct for these stress-strain diagrams.</p> <p>Compared to the submitted Table, in the final version of <strong>Table 3</strong> the column title of sigma break was changed to sigma max, which is more correct for these stress-strain diagrams.The title of the first column was set to "screw" instead of "feeding". </p>
Grid-Free Evaluation of Phonon-Limited Relaxation Times and Electrical Transport Properties
<p>Data, source codes and figures for the manuscript:</p> <p>"Grid-Free Evaluation of Phonon-Limited Relaxation Times and Electrical Transport Properties"</p>
Data for "Measurement report: Comparison of airborne in-situ measured, lidar-based, and modeled aerosol optical properties in the Central European background – identifying sources of deviations"
<p>A unique set of data is presented, derived from measurements conducted at the rural central European observatory at Melpitz, Germany. Data derived from remote sensing (lidar), airborne platforms (helicopter, balloon), and ground-based in-situ methods is included. Measured and Mie-modeled optical aerosol parameters are presented in the dry- and ambient state. Modeled optical parameters are based on Mie-theory. For ambient state hygroscopic growth simulations are utilized.</p>
Dataset for: Anniés et al., "Accessing structural, electronic, transport and mesoscale properties of Li-GICs via a complete DFTB-model with machine-learned repulsion potential"
<p>GPrep training data, GPrep jupyter notebook, .skf files.</p> <p>The GPrep code is available at https://doi.org/10.5281/zenodo.3697913</p>
Optical properties of mineral dust aerosols with non-absorptive coating: a numerical investigation
<p>Model data for optical calculations of non-absorptive coated mineral dust aerosol</p> <p>This repository provides data used for plots in a manuscript submitted to Optics Express. The folder contains optical data from calculations performed with the T-matrix code. The subdirectory aspect ratio contains results for eleven aspect ratios with the coating ratio equal to 0.5 stored in respective directories. The directory coating ratio contains results for eleven coating ratios with an aspect ratio of 1.37. The directory naming of folders within the subdirectories derives from the parameter choice as indicated in the manuscript.</p>
Dataset to "Surface Properties of the Hydrogen–Titanium System"
<p>Data of " Surface Properties of the Hydrogen−Titanium System" published in the Journal of Physical Chemistry C, 2021 DOI: 10.1021/acs.jpcc.1c08635</p>
Nanoindentation and AFM Dataset for the Microscale Mechanical Property of Granites
<p>This dataset contains the raw results of nanoindentation testing and Atomic Force Microscopy (AFM) testing, which were used to determine the elastic property of rock-forming minerals and interphases in granites. The dataset is presented and utilized in the paper 'Determining Young's Modulus of Arbitrarily-shaped Granite Samples using Accurate Grain-based Modelling with Micro-RME'. Full details of the experimental setup, procedure, and imaging analysis can be found in the paper and supporting information.</p> <p>The results of nanoindentation testing for different rock-forming minerals in granites are contained within three files: nanoindentation_quartz, nanoindentation_feldspar and nanoindentation_biotite. In these files, the raw data during nanoindentation testing is shown with achieved parameters, including elastic modulus, hardness, maximum load fore, maximum contact area, and contact depth. These results are then used to determine the elastic modulus of rock-forming minerals. The achieved Young's modulus for quartz, feldspar and biotite are 96.81 GPa, 69.50 GPa and 46.41 GPa, respectively, for present granitic samples.</p> <p>The results of AFM testing for interphases between different rock-forming minerals in granites are contained within three files: AFM_quartz_feldspar_interphase, AFM_feldspar_biotite_interphase and AFM_quartz_biotite_interphase. In these files, the raw data of 196,608 indents during AFM testing is shown with obtained parameters, including elastic modulus and surface roughness. These results are then used to determine the geometry and elastic modulus of interphases. The achieved Young’s modulus of interphase is 24.48 GPa for present granitic samples. Additionally, the geometry of striped interphases between different rock-forming minerals is shown, which is complex with varying widths.</p>
Changes in community-weighted trait mean, functional diversity, soil chemical properties and temperature along an elevational gradient in Tenerife, Canary Islands
<p>This dataset comprises community-weighted trait means and functional diversity of leaf traits, chemical soil properties and temperature recorded in roadside (disturbed) and interior (less disturbed) plots, along an elevational gradient of 2,300 m in Tenerife, Canary Islands. The leaf traits measured were specific leaf area (SLA), nitrogen, nitrogen to phosphorus ratio, leaf dry matter content (LDMC) and carbon to phosphorus ratio. The soil chemical properties measured were pH, nitrogen, nitrogen to phosphorus ratio, carbon to phosphorus ratio, calcium, potassium, magnesium and cation exchange capacity. Also the scores of the three first axes derived from a PCA analysis including the soil chemical properties are included. The temperature variables consist of bioclimatic variables Bio10 (mean temperature of the warmest quarter) and Bio11 (mean temperature of the coldest quarter). This dataset has been used for the analysis presented in Ratier Backes et al. (2021).</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.