Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
30,268
datasets available to search
ShareScore release 0.9.0
Dataset results
30,268 results for “Functioning”
Fig. 1 in Echinococcus multilocularis (Cestoda, Cyclophyllidea, Taeniidae): functional ultrastructure of the penetration glands and nerve cells within the oncosphere
Fig. 1 Schematic diagram illustrating localization of three secretory regions of the egg of Echinococcus multilocularis: two types of the penetration glands (PG1 and PG2) and two nerve cells (NC) of neurosecretory type. Note the oncospheral tegument composed of its peripheral anucleated layer and submerged subepithelial perikaryon and the hook region membrane surrounding the somatophore pole of the hexacanth. To simplify the diagram, some other oncospheral structures or cell types such as somatic and hook muscle systems with their
Fig. 2 in Echinococcus multilocularis (Cestoda, Cyclophyllidea, Taeniidae): functional ultrastructure of the penetration glands and nerve cells within the oncosphere
Fig. 2 Details of two infective hexacanths of Echinococcus multilocularis obtained by means of freeze substitution technique. a TEM micrograph showing the two penetration glands (PG1 and PG2) and a nerve cell (NC). Note: (i) the nucleus (N) of a nerve cell with heterochromatin islands (HCh), (ii) the presence of numerous mitochondria (m) and (iii) the neurosecretory granules (nsg) located in a nerve cell process. b Area of hexacanth with two penetration glands (PG1 and PG2). Note the "rouleau"-shaped assemblages (RA) of secretory granules of the type 1 penetration gland (sg1). H oncospheral hook, HM hook musculature, n nucleolus, OM oncospheral membrane, r ribosomes, sg2 secretory granules of the type 2 penetration gland
Fig. 5 in Impairment of retinal function in yellow perch (Perca flavescens) by Diplostomum baeri metacercariae
Fig. 5. Representative electroretinograms from eyes of an uninfected yellow perch (Perca flavescens) and a perch infected with Diplostomum baeri. Arrows indicate the a-wave and the b-wave. The ERG waves were analyzed for amplitude and latency (time to peak). Note reduction in ERG b-wave amplitude and increase in b-wave latency recorded from the infected eye. Stimulus intensity units = μJ/cm2, time base = 0.27 s/div, amplitude = 15.5 mV/div.
Fig. 3 in Impairment of retinal function in yellow perch (Perca flavescens) by Diplostomum baeri metacercariae
Fig. 3. Paraffin sections of normal yellow perch (Perca flavescens) retinas stained with H&E. A. Structure of the retina, photoreceptor layer, pigment epithelium, choroid and the rete mirabile which supplies high levels of O2 to the retina. B. Normal structure of the optic nerve, optic disc and cribiform plate. Bar = 100 μm. (For interpretation of the references to colour in this figure legend, the reader is referred to the Web version of this article.)
Fig. 4 in Impairment of retinal function in yellow perch (Perca flavescens) by Diplostomum baeri metacercariae
Fig. 4. Paraffin sections of yellow perch (Perca flavescens) retinas and choroid infected with Diplostomum baeri, stained with H&E. A. Metacercariae in the choroid layer with thinning of the pigment epithelium. Retina in the unifected region on the far left of the image is in proximity to the rete mirabile. B. Pocket of metacercariae with melanin debris due to extensive damage to the choroid and pigment epithelium. C. Large pocket of metacercariae with melanin debris and loss of the pigment epithelium and photoreceptor layer (arrow). D. Uninfected region of the same eye shown in image C with normal retina, pigment epithelium and optic nerve. This was the only metacercaria seen in the vitreous humor of a perch on a histological section. E. Presence of the metacercaria increases the diffusion distance for O2 from the rete mirabile to the retina. Note damage to the pigment epithelium in locations of contact with the metacercaria. F. WrightGiemsa stain of the same region shown in image E. No inflammatory cells were detected. Bar = 100 μm. (For interpretation of the references to colour in this figure legend, the reader is referred to the Web version of this article.)
Fig. 1 in Impairment of retinal function in yellow perch (Perca flavescens) by Diplostomum baeri metacercariae
Fig. 1. ERG recording chamber. The eyecup sits on filter paper saturated with Ringer solution making contact with the reference electrode. The recording electrode is in the vitreous humor of the eyecup. The LED was placed 4 cm from the eyecup.
Fig. 6 in Impairment of retinal function in yellow perch (Perca flavescens) by Diplostomum baeri metacercariae
Fig. 6. Effect of Diplostomum baeri infection on the electroretinogram of yellow perch (Perca flavescens) as compared to recordings from normal fish. Infection had no effect on the a-wave but significantly reduced b-wave amplitude. Infection caused a strong trend toward an increase in latency (time to peak) of the a-wave and significantly increased the latency of the b-wave. (*p ≤ 0.05; # 0.05 <p ≤ 0.06; t-test, n = 10).
Fig. 7 in Impairment of retinal function in yellow perch (Perca flavescens) by Diplostomum baeri metacercariae
Fig. 7. Flicker fusion frequency of the electroretinogram is reduced by Diplostomum baeri infection. A. Responses to stimulation at 10 Hz, 20 Hz and 40 Hz in an uninfected yellow perch (Perca flavescens). Flicker fusion is reached at 40 Hz. B. Responses to stimulation at 5 Hz and 10 Hz in an infected perch. Flicker fusion is reached at 10 Hz. Time base = 0.27 s/div, amplitude = 15.5 mV/div.
Figure 10b. The control loop's information displayed by the controller-Designing a Growing Functional Modules "Artificial Brain"
<p>Once performed the design and configuration, the controller and the local application are<br> executed by pressing the corresponding button. In case of a local simulation, two terminal windows<br> are generated. The first one, localized on the left side of the screen (figure 10.a), displays the<br> behavior of the simulation; the second one, localized on the right side of the screen (figure 10.b),<br> displays the behavior of the controller. Both application run concurrently and their respective<br> contents allow the user to observe and monitor the control session. The last text line of figure 10.b<br> displays the set of commands at cycle 201.</p>
Figure 10.a. Simulation's display: The characters "\__/" represents the front part of the car that should pass through the string "....==..=.==..==" representing the range of obstacles-Designing a Growing Functional Modules "Artificial Brain"
<p>Once performed the design and configuration, the controller and the local application are<br> executed by pressing the corresponding button. In case of a local simulation, two terminal windows<br> are generated. The first one, localized on the left side of the screen (figure 10.a), displays the<br> behavior of the simulation; the second one, localized on the right side of the screen (figure 10.b),<br> displays the behavior of the controller. Both application run concurrently and their respective<br> contents allow the user to observe and monitor the control session. The last text line of figure 10.b<br> displays the set of commands at cycle 201.</p>
Figure 8. Configuration of the controller-Designing a Growing Functional Modules "Artificial Brain"
<p>Before running the controller, it is necessary to specify the communication's configuration.<br> When pressing the “configure” button, two text windows appear (figure 8). The upper one allows to<br> specify the application's localization in order to run it previously to the controller. Presently, the<br> corresponding simulation will run on the same machine, thus the name of the corresponding<br> executable file must be specified. Otherwise, in the same field, the user should specify the IP<br> address of the server where the controlled system is running.</p>
Figure 7. Adding an Acting Module, its configuration values and its input connections-Designing a Growing Functional Modules "Artificial Brain"
<p>The fourth step consists of adding an Acting Module, its configuration values and input<br> connection as shown in figure 7. A type “CI” is assigned because it functionality will consist of<br> triggering a steering command in accordance with the perception from the Sensing Module and in<br> order to satisfy the input request from the Global Goal. Consequently, the feedback is set to “1 18”<br> where “1” is the reference to the Sensation “free” and “18” to the perception in output of the<br> Sensing Module. The identifier “18” for this perception is computed as at the total number of<br> Sensation plus one (first sensing module). Identifiers and their references are automatically updated<br> when a Sensation is added or deleted.</p>
Figure 6. Adding a Global Goal with its required type-Designing a Growing Functional Modules "Artificial Brain"
<p>The next step consists of adding a Global Goal expressing a motivation required by the<br> controller. The goal is to keep the vehicle's front free of obstacles, thus the Sensation “free” should<br> stay equal to “1”. After adding a new Global Goal, its assigned type should be “Cst” corresponding<br> to a constant output request (see figure 6). In the parameter field, its specified value is “1”.</p>
Figure 4. Adding a Sensing Module and selecting its type-Designing a Growing Functional Modules "Artificial Brain"
<p>GFM controllers learn to satisfy some predefined goals<br> while interacting with the environment and thus should be considered as artificial brains. An<br> example of the design process of a simple controller is provided herein to explain the inherent<br> methodology, to exhibit the components' interconnections and to demonstrate the control process.</p>
Figure 5. Adding connections from Sensations 2-17 to the Sensing Module 1-Designing a Growing Functional Modules "Artificial Brain"
<p>The next step consists of connecting the sixteen sensations in the input of the Sensing<br> Module. To do this, the user must right-click on each Sensation, then on “new connection” and<br> indicate the Sensing Module identifier. The resulting design is presented on figure 5. Finally, the<br> Acting Module's field is set to “1” (indicating the number of the Acting Module that later will assess<br> the correctness of the perception) and the unique extra-parameter set to “20” (related with the<br> module's behavior).</p>
Figure 2. The editor's components from left to right: a) Sensation, b) Sensing Module, c) Global Goal, d) Acting Module.-Designing a Growing Functional Modules "Artificial Brain"
<p>Each “Sensation” corresponds to an integer value corresponding to a specific system's<br> sensor. Sensations are symbolized by a green rectangle on the editor's canvas (figure 2.a). Each<br> newly created sensation is assigned an identifier previously incremented. Its unique field, initially<br> filled with question-marks, allows it to associate a mnemonic in order to facilitate its interpretation.</p>
Figure 1. The GFM controller and its control loop-Designing a Growing Functional Modules "Artificial Brain"
<p>The GFM control loop has many similarities to a standard one as shown in figure 1. The<br> controller, delimited by a dotted line, sends during each cycle an output command in order to trigger<br> some mechanical or virtual actuators and in return, receives a feedback composed of a sequence of<br> sensors' values. However, the concept of reference value is replaced by “Global Goals” which are<br> integrated to the controller.</p>
Figure 4. The relationship between the functional blocks of the systemModern Tools in Patient-Centred Speech Therapy for Romanian Language
<p>The project’s complexity results from the considerable number of research fields it presupposes: artificial intelligence (pattern recognition, learning expert systems), virtual reality, digital signal processing, digital electronic (VLSI), computer architecture, and psychology (assessment procedures and techniques, therapeutic instructions, validation experimental design). In order to assure an assisted therapy one considers the relationships between six functional blocks: patient, speech therapist, office monitor program, expert system, 3D model and patient monitor program. The information flow of the system is given in Figure 4. There is a close connection between the child, as a patient, and his speech therapist. All the other modules are designed so as to contribute to the therapeutic action of the teacher. The monitor program allows realising a complex assessment and collecting information about the child; equally, it provides the opportunity to periodically track the child’s therapy results. The child is provided instant audio feedback which allows him/her to check the audio recordings history. The home monitor program is designed so as to build a virtual interface between teacher and child in order to allow the patient to continue his therapy at home. This component is designed both for the personal computer, which is placed in the therapist’s office, and personal digital assistant (PDA) which is used at home for independent work.</p>
BRAIN Journal-Prediction of Thyroid Disease Using Data Mining Techniques-Figure 1. Factors that Affect Thyroid Function (The Institute for Functional Medicine, 2014)
<p> In Figure 1 are presented the main factors that affect the thyroid function. It is obvious that factors such as stress, infection, toxins, trauma and certain medication are directly responsible for the improper production of thyroid hormones. Symptoms identification and the early detection of abnormal values of thyroid hormones after clinical investigation will help in establishing the proper diagnostic and to prescribe the right medication. The patient must periodically evaluate his clinical state in order to receive the treatment as long as he needs it. </p>
Questionnaire, R Scripts and Response Data Set of the Survey on Functionally Similar Code Clones
<p>In 2017, we conducted an open online survey regarding functionally similar code clones with practitioners. We make the used questionnaire, the data from the response to the questionnaire and our used R script for the analysis openly available.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.