NHP Test Cage
Purpose-specific NHP test cage and stand geometry for studies that need a defined procedural position, repeatable staff access, and planned integration with protocol equipment.
The main unit measures 500 × 1000 × 1700 mm and the documented test stand measures 700 × 500 × 1400 mm.
Louise Corscadden, PhD
Director of Science · ConductScience
Ask Louise about NHP Test Cage fit, setup, configuration, or quote prep.
Already working with us? Sign in to connect this with My Scientist.
Key Specifications
Full details →- Model fit
- Configured during quote
- SKU family
- CS-HH-NHP-TEST
- Sizing
- Model-specific dimensions confirmed from the selected configuration
- Ordering
- Quote-reviewed before fulfillment
- Category
- Large Animal Housing
- Build notes
- Stainless steel
Build a repeatable test station around the protocol
An NHP test cage is most useful when it is planned as part of the complete experimental station. The enclosure, stand, animal access, operator position, task hardware, recording equipment, and cleaning sequence all affect how consistently a procedure can be performed. This page separates the test-cage workflow from general housing so investigators can evaluate those relationships directly.
The documented main unit measures 500 × 1000 × 1700 mm, and the associated test stand measures 700 × 500 × 1400 mm. Recording both sets of dimensions matters for room planning because the working arrangement may occupy more space than the cage alone. Teams can use these values to review doorways, circulation, operator clearance, equipment placement, and the delivery route. The final relationship between the cage and stand should be confirmed during quote review.
Before selecting a configuration, map the procedure from start to finish. Identify how the animal enters and leaves the station, where staff stand, which body area or task surface requires access, what equipment must be positioned nearby, and how the setup returns to its starting condition between sessions. This process highlights the door, panel, fixture, restraint, cable, and platform details that need explicit confirmation.
Repeatability comes from controlling the workflow, not from dimensions alone. If the study uses stimulus delivery, response devices, imaging, physiologic recording, or other protocol equipment, provide the relevant interface requirements with the quote request. ConductScience can then review the physical layout and distinguish standard cage components from requested study-specific additions.
Facility and animal-care requirements remain part of the same decision. Confirm animal size, session duration, acclimation or training plan, cleaning method, staff access, and emergency procedures through the institution's approved process. Also review the room service area, transport route, and final placement. Bringing these facts together early helps the delivered test station support both scientific consistency and practical daily operation.
Features & Benefits
Model
- HH-A-2-13
Main unit dimensions
- 500 × 1000 × 1700 mm
Test stand dimensions
- 700 × 500 × 1400 mm
Construction
- Stainless steel
Setup Guide
What’s in the Box
- Selected NHP test cage and stand configuration as defined in the quote
Why are cage and stand dimensions listed separately?
Both contribute to room fit and the working arrangement, so the complete station must be planned rather than the cage alone.
Can study-specific fixtures be added?
Requested fixtures and interfaces can be reviewed during quoting; they are included only when stated in the final configuration.
What protocol details are most useful?
Share the animal-use plan, operator sequence, required access, equipment positions, task hardware, cleaning method, and room drawing.
Is this intended as general housing?
No. It is a purpose-specific test station; general NHP housing configurations are available on a separate family page.
Have a question about this product?
Have a question? Just ask.
Send it over and we'll email you a personalized answer — no call, no scheduling.
Prefer to talk it through?
