Benchtop FiberSpin NMR
Compact 0.5 Tesla NMR analyzer for rapid, non-destructive quantification of spin-finish content on synthetic fibers using CPMG pulse sequence.
The Benchtop FiberSpin NMR is a compact, dedicated pulsed NMR analyzer designed for rapid, non-destructive quantification of spin-finish content on synthetic fibers. Built around a 0.5 Tesla permanent magnet with a specialized 45 mm × 78 mm probe, this instrument employs the CPMG (Carr-Purcell-Meiboom-Gill) pulse sequence to deliver results in seconds rather than the hours required by traditional solvent extraction methods.
Operating at 14 MHz with a minimum sample size of just 1 g, the instrument provides essential quality control capabilities for textile manufacturing and research applications. The system weighs only 5 kg with a footprint of 300 × 200 × 130 mm, requiring no cryogens, compressed gases, or specialized infrastructure beyond standard AC power (100-240V, 50/60Hz).
How It Works
The FiberSpin NMR operates on the principle of nuclear magnetic resonance relaxometry using the Carr-Purcell-Meiboom-Gill (CPMG) pulse sequence. The 0.5 Tesla permanent magnet creates a uniform magnetic field that aligns proton spins in the sample. A 90° radio frequency pulse at 14 MHz tips the magnetization into the transverse plane, followed by a train of 180° refocusing pulses that generate spin echoes while compensating for magnetic field inhomogeneities.
Spin-finish oils exhibit characteristic T2 relaxation times that differ significantly from the synthetic fiber matrix. The CPMG sequence measures the transverse relaxation decay with the specified 4-second acquisition window, allowing quantitative determination of oil content through signal amplitude analysis. The 4-second pulse repetition time ensures adequate recovery between measurements.
The specialized 45 mm diameter probe accommodates fiber samples as small as 1 g, enabling rapid screening without destructive sample preparation. Data processing algorithms separate signals based on their T2 relaxation properties within the specified 1-1000 ms range, providing direct quantification of spin-finish content typically expressed as weight percentage.
Features & Benefits
Field of study
- Chemistry
- Spectroscopy
- Textile Engineering
Product Application
- Fiber Analysis Industry
- Fiber Industry
- Nuclear Magnetic Resonance Spectroscopy
- Production and Quality Control
- Textile Industry
magnetic_field_strength
- 0.5 Tesla
probe_diameter
- 45mm
probe_length
- 78mm
minimum_sample_size
- 1g
magnet_type
- permanent magnet
Automation Level
- semi-automated
Brand
- Greenwaves Scientific
Power/Voltage
- 100-240V, 50/60Hz
Temperature Range
- 0-45°C
Research Domain
- Analytical Chemistry
- Materials Science
Weight
- 11.02 kg
Dimensions
- L: 3070.87 mm
- W: 1771.65 mm
- H: 1.77 mm
| Feature | This Product | Typical Alternative | Advantage |
|---|---|---|---|
| Magnetic Field Strength | 0.5 Tesla permanent magnet | Entry-level systems often use 0.3-0.4 Tesla magnets | Higher field strength improves signal-to-noise ratio and measurement sensitivity for samples with low oil content. |
| Sample Size Requirement | 1 g minimum sample | Many systems require 5-10 g samples | Smaller sample requirements enable testing of limited or expensive fiber samples without material waste. |
| Probe Design | 45 mm × 78 mm specialized fiber probe | Generic sample holders adapted for solid materials | Purpose-built probe geometry optimizes RF field uniformity and signal collection specifically for fibrous textile materials. |
| Operating Temperature Range | 0-45°C operational range | Many benchtop systems specify narrower ranges | Extended temperature tolerance supports deployment in production environments with variable climate control systems. |
| Power Requirements | Universal AC power (100-240V, 50/60Hz) | Some systems require specialized power conditioning | Standard power compatibility simplifies installation in diverse international manufacturing facilities without electrical modifications. |
| Measurement Speed | 4-second pulse repetition time with 4-second acquisition | Longer acquisition times for equivalent precision | Rapid measurement cycles enable high-throughput screening applications in quality control workflows. |
The Benchtop FiberSpin NMR combines 0.5 Tesla permanent magnet technology with purpose-built textile probe design for dedicated fiber analysis applications. The compact form factor and standard infrastructure requirements enable production floor deployment while maintaining the measurement capabilities needed for quantitative quality control.
Practical Tips
Establish separate calibration curves for each fiber type and spin-finish chemistry combination using certified reference materials that span your expected oil content range.
Why: Different polymer matrices and oil formulations exhibit distinct T2 relaxation properties that directly affect quantitative measurement accuracy.
Cut fiber samples to uniform lengths and ensure consistent packing density in the 45 mm probe chamber by using standardized loading procedures.
Why: Sample geometry and packing density affect RF field penetration and signal homogeneity, directly impacting measurement reproducibility.
Maintain a minimum 1-meter clearance of ferromagnetic materials from the 0.5 Tesla permanent magnet assembly during operation and storage.
Why: External magnetic fields can distort the measurement field and potentially affect both signal quality and long-term magnet stability.
Allow adequate time for temperature stabilization within the 0-45°C operating range, particularly after power cycling or environmental changes.
Why: Temperature variations affect RF electronics performance and can influence pulse timing precision critical for accurate T2 measurements.
If signal intensity decreases over time, verify probe loading consistency and check for moisture uptake in hygroscopic fiber samples.
Why: Variable sample conditions and moisture content changes are common causes of signal drift in textile NMR measurements.
Post appropriate magnetic field warnings and secure all ferromagnetic tools and components before approaching the 0.5 Tesla magnet assembly.
Why: The permanent magnet creates significant attractive forces on metallic objects and may interfere with pacemakers or other medical devices.
Store fiber samples in sealed containers at stable humidity levels and analyze at consistent environmental conditions within the specified temperature range.
Why: Moisture content variations affect T2 relaxation measurements and can interfere with accurate oil quantification in water-sensitive materials.
Setup Guide
What’s in the Box
- Benchtop FiberSpin NMR main unit
- AC power adapter with international plugs
- USB interface cable
- Sample loading accessories (typical)
- Reference calibration standards (typical)
- User manual and software installation media
- Calibration certificate
Warranty
ConductScience provides a standard one-year manufacturer warranty covering parts and labor, with technical support for method development and troubleshooting. Extended service contracts are available for high-throughput production environments.
Compliance
References
Background reading relevant to this product:
What is the minimum detectable spin-finish content and measurement precision achievable with this system?
Consult product datasheet for specific detection limits. Precision depends on sample preparation consistency, fiber type, and calibration against certified reference materials with known oil content matching your application.
Can the instrument analyze different types of synthetic fibers and spin-finish formulations simultaneously?
The CPMG sequence detects proton-containing components regardless of specific chemistry, but different fiber types and oil formulations require individual calibration curves for quantitative analysis due to varying T2 relaxation properties.
How critical is sample packing density for measurement reproducibility in the 45 mm probe?
Consistent packing density is essential for reproducible results. The probe geometry requires uniform sample distribution to maintain consistent RF field exposure and signal intensity across the 1 g minimum sample size.
What maintenance requirements exist for the 0.5 Tesla permanent magnet system?
Permanent magnets require no active maintenance but should be protected from temperature extremes beyond the 0-45°C operating range and strong external magnetic fields that could affect field strength or homogeneity.
Can the T2 range of 1-1000 ms distinguish between different oil components in complex formulations?
The 0.5 Hz spectral resolution can potentially resolve components with distinct relaxation properties, but specific separation capability depends on the T2 differences between oil components in your particular formulation chemistry.
How does this NMR approach compare to traditional gravimetric extraction methods for accuracy?
NMR provides results in seconds versus hours for extraction methods, requires no solvents, and preserves samples, but quantitative accuracy depends on proper calibration against gravimetric standards for your specific fiber and oil combination.
What data formats and integration capabilities are available for laboratory information systems?
Consult product documentation for specific data export formats and software integration capabilities with common laboratory data management systems and statistical analysis packages.
Have a question about this product?
Frequently Bought Together
