Chemical Synthesis Microfluidic Chip
Precision microfluidic chip with 100-300 μm configurable channel depths for continuous-flow chemical synthesis applications.
Reusable chip — designed for multiple experimental runs. Compatible with standard microfluidic tubing: steel pins (0.7 mm ID / 1.0 mm OD) and silicone tubing (0.8 mm ID / 1.9 mm OD). Available in bulk packs (5‑, 10‑, and 25‑unit) for lab-scale and consumable workflows.
Louise Corscadden, PhD
Director of Science · ConductScience
Ask Louise about Chemical Synthesis Microfluidic Chip fit, setup, configuration, or quote prep.
Already working with us? Sign in to connect this with My Scientist.
Key Specifications
Full details →- Model fit
- 3 selectable configurations
- SKU family
- WHM-0025
- Sizing
- 25.0 x 15.0 x 3.0 cm
- Ordering
- Online checkout and quote request available
- Category
- Lab Equipment
- Build notes
- Confirm accessories, station layout, and support needs before purchase
The Chemical Synthesis Microfluidic Chip is a precision-engineered platform for continuous-flow chemical synthesis in microscale environments. Featuring configurable channel depths from 100-300 μm, this compact chip enables controlled chemical reactions with enhanced mixing efficiency and reduced reagent consumption compared to traditional batch methods.
Designed for research applications requiring precise control over reaction conditions, the chip supports continuous-flow synthesis protocols where reagent streams are combined and reacted within defined microchannel geometries. The optimized channel architecture facilitates laminar flow conditions and predictable residence times for reproducible synthesis outcomes.
How It Works
The microfluidic chip operates on the principle of laminar flow mixing within precisely defined microchannels. Reagent solutions are introduced at separate inlets and flow through channels with depths ranging from 100-300 μm, creating predictable flow profiles with minimal turbulence. The channel geometry promotes controlled mixing through diffusion at the interface between reagent streams.
Reaction kinetics are controlled by adjusting flow rates to modify residence time within the synthesis zone. The microscale environment provides enhanced heat and mass transfer compared to conventional reactors, enabling more uniform reaction conditions and improved product selectivity. The continuous-flow design allows for steady-state operation and real-time monitoring of synthesis parameters.
Features & Benefits
Pack Size
- 5-Pack
- 10-Pack
- 25-Pack
Weight
- 0.03 kg
Dimensions
- L: 25.0 mm
- W: 15.0 mm
- H: 3.0 mm
| Feature | This Product | Typical Alternative | Advantage |
|---|---|---|---|
| Channel Depth Range | 100-300 μm configurable | Fixed depth designs often limited to single channel dimensions | Enables optimization of flow characteristics for different synthesis requirements and reagent viscosities |
| Footprint Size | 25 x 15 x 3 mm compact design | Varies by model and complexity | Minimizes laboratory space requirements while maintaining synthesis capability |
| Application Focus | Optimized for chemical synthesis and continuous-flow reactions | General-purpose microfluidic platforms may lack synthesis-specific features | Provides targeted functionality for synthetic chemistry applications |
| Weight and Portability | 0.03 kg lightweight design | Heavier glass or metal alternatives | Facilitates easy handling and integration with analytical equipment |
The Chemical Synthesis Microfluidic Chip offers configurable channel depths from 100-300 μm in a compact 25 x 15 x 3 mm footprint. The design specifically targets continuous-flow synthesis applications with optimized channel geometry for enhanced mixing efficiency.
| Model | SKU | Listed price | Status | Dimensions |
|---|---|---|---|---|
| 25-Pack | WHM-0025-25PK | Quote | Available | 25.0 x 15.0 x 3.0 cm |
| 10-Pack | WHM-0025-10PK | $1,490.00 | Available | 25.0 x 15.0 x 3.0 cm |
| 5-Pack | WHM-0025-5PK | Quote | Available | 25.0 x 15.0 x 3.0 cm |
Practical Tips
Verify flow rates using gravimetric or volumetric methods before each synthesis run.
Why: Ensures accurate stoichiometry and reproducible reaction conditions across experiments
Flush channels with compatible cleaning solvent immediately after synthesis completion.
Why: Prevents product precipitation and channel blockages that could affect future experiments
Filter all reagent solutions through 0.2 μm filters before introduction to chip.
Why: Eliminates particulates that could block microchannels and disrupt flow patterns
Allow system to reach steady-state before collecting product samples for analysis.
Why: Ensures representative sampling and consistent product composition
Monitor inlet pressures to detect developing blockages before complete flow stoppage.
Why: Enables proactive maintenance and prevents experiment interruption
Use appropriate chemical containment for all reagents and reaction products.
Why: Protects laboratory personnel from exposure to potentially hazardous synthesis intermediates
Setup Guide
What’s in the Box
- Chemical Synthesis Microfluidic Chip
- User manual and protocol guide (typical)
- Inlet connection fittings (typical)
- Protective storage case (typical)
Warranty
ConductScience provides a standard one-year manufacturer warranty covering defects in materials and workmanship. Technical support includes protocol guidance and troubleshooting assistance for synthesis applications.
Compliance
What solvents are compatible with the chip material?
Consult product datasheet for specific chemical compatibility information. Most microfluidic chips tolerate aqueous solutions and common organic solvents, but compatibility should be verified for each application.
How do I optimize mixing efficiency for my synthesis?
Adjust flow rates to control residence time and modify reagent concentration gradients. Channel depth selection (100-300 μm range) also influences mixing characteristics.
What flow rate ranges are recommended?
Optimal flow rates depend on synthesis requirements and desired residence time. Start with low flow rates (μL/min range) to ensure adequate mixing and reaction completion.
Can the chip handle temperature-controlled synthesis?
The compact design facilitates integration with heating/cooling stages. Consult datasheet for maximum operating temperature limits and thermal expansion considerations.
How do I prevent channel blockages during synthesis?
Filter all reagent solutions and maintain appropriate flow velocities to prevent precipitation or particle settling within channels. Regular cleaning protocols are essential.
What analytical methods work with continuous-flow output?
The chip output is compatible with online analytical techniques including UV-Vis spectroscopy, mass spectrometry, and chromatographic analysis for real-time monitoring.
Have a question about this product?
Have a question? Just ask.
Send it over and we'll email you a personalized answer — no call, no scheduling.
Prefer to talk it through?
Accessories
Enhance your setup with compatible accessories
Frequently Bought Together
