Remote Wireless Weather Station
Automatic weather station measuring air temp, humidity, soil moisture, wind, rainfall, light & pressure.
Configured to your study protocol. Request a quote.
Louise Corscadden, PhD
Director of Science · ConductScience
Ask Louise about Remote Wireless Weather Station fit, setup, configuration, or quote prep.
Already working with us? Sign in to connect this with My Scientist.
Key Specifications
Full details →- Air Temperature Range
- −40 °C to 120 °C
- Relative Humidity Range
- 0 % to 100 % RH
- Soil Moisture Range
- 0 % to 100 %
- Soil Temperature Range
- −50 °C to 100 °C
- Wind Speed Range
- 0 to 60 m/s
- Wind Direction Range
- 0 ° to 360 °
The Remote Wireless Weather Station is an automatic monitoring system that continuously observes, records, and stores atmospheric and environmental data without requiring manual intervention. Designed for deployment in field and research settings, it captures a comprehensive array of meteorological parameters in a single integrated unit. The station uploads data over a 4G CAT1 cellular link (2G and 4G networks supported) to a management cloud platform, where users can set collection, storage and sending intervals remotely and view photos from the included camera in real time.
The station measures air temperature, relative humidity, soil temperature, soil moisture, wind speed, wind direction, rainfall, light intensity, and atmospheric pressure—covering the core variables that environmental, agricultural, and ecological researchers track across experimental sites. Each sensor operates across ranges suited to demanding outdoor conditions, from sub-zero soil temperatures to high-wind events and intense solar illumination.
Beyond the standard sensors, other parameters can be customized for a study. This station's multi-sensor architecture makes it applicable across a wide range of disciplines and deployment contexts.
Because site conditions, communication requirements, mounting constraints, and data-logging needs vary by study, this station is configured to match your specific protocol. Contact us to request a quote and discuss the setup that fits your research.
Air Temperature Range
- −40 °C to 120 °C
Relative Humidity Range
- 0 % to 100 % RH
Soil Moisture Range
- 0 % to 100 %
Soil Temperature Range
- −50 °C to 100 °C
Wind Speed Range
- 0 to 60 m/s
Wind Direction Range
- 0 ° to 360 °
Rainfall Range
- 0 to 9,999 mm
Light Intensity Range
- 0 to 200,000 lux
Atmospheric Pressure Range
- 450.0 hPa to 1,100.0 hPa
Communication
- 4G CAT1 link to the server; supports 2G and 4G networks
Remote Configuration
- Data collection time and storage and sending intervals set remotely through the management cloud platform
Camera
- CMOS 1/2.7-inch image sensor, 1280 × 1080 pixels; timed capture; on-site photos viewable on the platform in real time
Data Storage
- TF card holding 5 years of sensor data
Location Tracking
- Automatic altitude and GPS coordinates, to guard against theft and displacement
Remote Maintenance
- Online fault diagnosis and firmware upgrade
What environmental parameters does the station measure?
The station simultaneously measures air temperature, relative humidity, soil moisture, soil temperature, wind speed, wind direction, rainfall accumulation, light intensity, and atmospheric pressure, giving you a complete picture of both above-ground and near-surface conditions at your site.
What are the measurement ranges for the key sensors?
Air temperature covers −40 °C to 120 °C; relative humidity spans 0–100 % RH; soil temperature ranges from −50 °C to 100 °C; soil moisture reads 0–100 %; wind speed measures 0–60 m/s; wind direction captures the full 0–360 °; rainfall accumulation goes up to 9,999 mm; light intensity reaches 200,000 lux; and atmospheric pressure covers 450.0–1,100.0 hPa.
Is the station suitable for agricultural field research and crop monitoring?
Yes. The combination of soil temperature, soil moisture, air temperature, humidity, rainfall, and light intensity sensors makes the station well suited for monitoring growing conditions, irrigation scheduling studies, and crop stress research across open-field and greenhouse-adjacent sites.
Does the station store data automatically, or does it require continuous operator presence?
The station observes and stores weather data automatically, so continuous on-site supervision is not required. This makes it appropriate for remote or unattended deployment over extended monitoring campaigns.
How do I determine the right configuration for my study?
Because deployment environments, power availability, communication infrastructure, and sensor priority differ between studies, the station is configured to your specific requirements. Reach out to our team with details about your site and monitoring objectives, and we will prepare a configuration matched to your protocol.
Have a question about this product?
Have a question? Just ask.
Send it over and we'll email you a personalized answer, with no call or scheduling.
Prefer to talk it through?
Frequently Bought Together
