Chemiluminescence Imaging System W2000 Plus
Chemiluminescence imaging system for ECL Western blot detection.
Deep-cooled 9 MP monochrome camera (−40°C relative to ambient); 0.1 ms – 1 h exposure range; time-lapse acquisition records the full signal timeline in a single run; 136×136 mm field of view (expandable to 200×200 mm); simultaneous imaging of 10 or more membranes.
Louise Corscadden, PhD
Director of Science · ConductScience
Ask Louise about Chemiluminescence Imaging System W2000 Plus fit, setup, configuration, or quote prep.
Already working with us? Sign in to connect this with My Scientist.
Key Specifications
Full details →- Model fit
- Configured during quote
- SKU family
- CS-W2000 Plus
- Sizing
- Model-specific dimensions confirmed from the selected configuration
- Ordering
- Online checkout and quote request available
- Category
- Gel & Clarity Testing
- Build notes
- Confirm accessories, station layout, and support needs before purchase
The W2000 Plus Chemiluminescence Imaging System is designed exclusively for ECL-based Western blot detection. Its deep-cooled monochrome camera operates at −40°C relative to ambient, reducing dark current to 0.0003 e⁻/s/pixel and enabling detection of faint chemiluminescent signals that would otherwise require film. The time-lapse acquisition engine records the full exposure timeline in a single run: strong bands are retrieved by scrolling back in the time axis; weak bands are captured by extending exposure forward without restarting the experiment. Up to 10 membranes can be imaged simultaneously without repositioning, and intelligent auto-exposure selects optimal exposure time and binning automatically.
Key Features
- Deep-cooled monochrome camera: −40°C relative to ambient temperature
- Dark current 0.0003 e⁻/s/pixel at −15°C — minimal noise for weak-signal detection
- 9 MP sensor (2992×3000, 3.76×3.76 µm), 16-bit (65,536 grayscale levels)
- Full-well capacity 16.5 ke⁻ (HCG) / 50.5 ke⁻ (LCG); SNR 42.2 dB (HCG) / 47 dB (LCG)
- Exposure range 0.1 ms – 1 h; three modes: High Quality / Standard / High Sensitivity
- Time-lapse imaging: retrieve any frame from within the recorded exposure window
- Time accumulation: extend exposure after initial run without discarding captured data
- Real-time preview with overexposure region highlighting
- Simultaneous imaging of 10 or more membranes
- 136×136 mm working area, expandable to 200×200 mm
Applications
- ECL chemiluminescence Western blot detection
- High-throughput multi-membrane WB workflows
- Weak-signal and low-abundance protein detection
- Pre-stained protein ladder imaging
- Quantitative band density analysis
Technical Specifications
| Parameter | Specification |
|---|---|
| Dimensions (W×D×H) | 400×371×700 mm |
| Camera | |
| Camera Type | Black and White (Monochrome) Camera |
| Pixel Resolution | 9 Megapixels |
| Resolution | 2992×3000 |
| Pixel Size | 3.76×3.76 µm |
| Target Size | 1" (11.28×11.28 mm) |
| Full Well Capacity | 16.5 ke⁻ (HCG), 50.5 ke⁻ (LCG) |
| Sensitivity | 877 mV @ 1/30 s |
| Readout Noise | 1.24 e⁻ (HCG), 3.22 e⁻ (LCG) |
| Dark Current | 0.0003 e⁻/s/pixel at −15°C |
| Signal-to-Noise Ratio | 42.2 dB (HCG), 47 dB (LCG) |
| Exposure Time | 0.1 ms – 1 h |
| Binning Mode | 1×1, 2×2, 3×3 |
| Grayscale | 16-bit (65,536 gray levels) |
| Cooling | Relative to ambient temperature −40°C |
| Lens | |
| Type | Prime lens |
| Focal Length | 17 mm |
| Aperture | F0.95–F16 |
| Light Sources | |
| Bright-Field | Downward-facing LED white light, symmetrically distributed on both sides |
| Dark Box | |
| Light Isolation | Fully light-sealed; isolates environmental light |
| Door Control | Door sensor controls bright-field LED on/off |
| Imaging Area | |
| Effective Field of View | 136×136 mm (expandable to 200×200 mm) |
| Software | |
| Exposure Modes | High Quality (highest image quality) / Standard (balanced) / High Sensitivity (fastest) |
| Auto Exposure | Intelligent exposure with automatic binning selection |
| Real-time Imaging | Yes — live signal preview with overexposure indication |
| Time-lapse Imaging | Yes — retrieve any frame within the recorded exposure window |
| Time Accumulation | Yes — extend exposure after initial run |
| System | |
| Industrial Computer | 10.4-inch display (1024×768), Windows 10 |
| External Interfaces | USB 3.0 × 2 |
| Operating Voltage | 90–132 VAC / 180–264 VAC (selectable via switch), 47–63 Hz |
| Power Consumption | 100 W |
| Net Weight | 22 kg |
Ordering Information
| Cat. No. | Description |
|---|---|
| CS-W2000 Plus | Chemiluminescence Imaging System W2000 Plus — Set |
Also Available
Looking for true-color pre-stained ladder imaging alongside ECL detection? Explore the W3000 Plus — a dual-camera system with an independent 45 MP color camera for marker imaging and one-click marker band restoration. Need combined WB and gel imaging in one instrument? See the W5000 Plus. For advanced fluorescence Western blot imaging, see the W6000.
No Q&A yet. Have a question? Ask below.
Have a question about this product?
Have a question? Just ask.
Send it over and we'll email you a personalized answer — no call, no scheduling.
Prefer to talk it through?
