Outdoor Particulate Matter Monitor, PM2.5 / PM10 / TSP
Beta-ray attenuation particulate monitor, configurable to one of PM2.5, PM10 or TSP.
Louise Corscadden, PhD
Director of Science · ConductScience
Ask Louise about Outdoor Particulate Matter Monitor, PM2.5 / PM10 / TSP fit, setup, configuration, or quote prep.
Already working with us? Sign in to connect this with My Scientist.
Key Specifications
Full details →- Model fit
- Configured during quote
- SKU family
- CS-AIR-00017
- Sizing
- Model-specific dimensions confirmed from the selected configuration
- Ordering
- Quote-reviewed before fulfillment
- Category
- Air Quality
- Build notes
- Confirm accessories, station layout, and support needs before purchase
An outdoor particulate monitoring system on beta-ray attenuation, configured at order time to one of PM2.5, PM10 or total suspended particulate.
Key features
- Uses non-in-situ β-ray absorption, unaffected by particle shape, color, or density.
- Dynamic heating method ensures high-precision measurements in all weather conditions.
- Equipped with an industrial-grade air conditioning system for stable environmental control.
- Enabling automatic event capture and activation of onsite suppression systems.
- Includes an automatic reminder for filter tape consumption.
Applications
Built for regulatory networks, construction and industrial site monitoring.
- particulate matter monitoring
Features & Benefits
Principle
- Beta-ray attenuation
Components
- PM2.5/PM10/TSP (Choose 1 of 3)
Range
- 0~10 mg/m³
Resolution
- 0.1μg/m³
Accuracy
- 16.67L/min±1%
Lower Detection Limit
- ≤2μg/m³
Calibration Membrane Repeatability
- ±2% standard value
βSource
- C14 source，no radiation license required
Communication
- 4G wireless communication, optional LED display
Operating Conditions
- Temperature: (-30 to 50)℃, Humidity: (0~100)% RH (no condensation)
Dimensions
- (H×W×D): 1196×791x700 mm
Voltage
- (220±10%)V AC / (45~55)Hz, Power: ≤1500W
What does this instrument measure, and who is it for?
It measures one particulate size fraction, selected at order time. It is built for regulatory networks, construction and industrial site monitoring. It is designed for continuous, unattended operation in a monitoring shelter or cabinet, with periodic zero and span calibration.
What measurement principle does it use?
Beta-ray attenuation across a continuously collected deposit, with the size-selective inlet chosen at order time. Because it reports mass rather than a scattering signal, its output is directly comparable with the gravimetric reference method.
Which specifications are confirmed?
The manufacturer's published specification table lists twelve parameters for this instrument, and every one of them is reproduced on this page. They include Components at PM2.5/PM10/TSP (Choose 1 of 3), Range at 0~10 mg/m³ and Resolution at 0.1μg/m³. ConductScience transcribed them from the manufacturer's engineering documentation without alteration.
What should be confirmed before ordering?
Confirm siting and inlet configuration, zero and span gas supply, the calibration interval your reporting regime requires, and the data acquisition and reporting path. These are configured and quoted per installation, so raise anything unusual about the site during quote review rather than after delivery.
What else is needed to run it?
A zero air generator and a multi-point dilution calibrator. Every concentration this analyser reports is measured against its zero. A zero that is not actually zero is a systematic error in every number downstream of it, so the calibration gear is not an accessory — it is what makes the readings defensible.
How is it supplied?
This instrument is configured and quoted per installation rather than sold at a list price. Request a quote and we will confirm the configuration, the site requirements and the lead time before anything is ordered.
Have a question about this product?
Have a question? Just ask.
Send it over and we'll email you a personalized answer — no call, no scheduling.
Prefer to talk it through?
