Battery-Powered Soil Auger Sampler
The sampler collects soil from set depths for soil surveys and for physical and chemical testing.
Louise Corscadden, PhD
Director of Science · ConductScience
Ask Louise about Battery-Powered Soil Auger Sampler fit, setup, configuration, or quote prep.
Already working with us? Sign in to connect this with My Scientist.
Key Specifications
Full details →- Power Supply
- 48 V lithium battery
- Rotation Speed
- 0 to 300 rpm, variable speed
- Depth per Pass
- 20 cm
- Extension Rod Length
- 30 cm or 50 cm
- Auger
- Replaceable spiral auger with a depth scale
- Motor Unit Size
- 55 × 50 × 35 cm
A 48 V lithium battery powers the motor. You hold the sampler by its two handles while the motor turns the spiral auger into the soil. Sampling takes less effort than with a hand auger.
A depth scale marked on the outside of the auger shows how deep it has gone, so you can stop at your target depth.
The sampler comes apart for transport and storage.
Test the samples with our Soil Nutrient Tester or Rapid Test Soil pH Meter. At the same points, record compaction with our Soil Compaction Meter.
Power Supply
- 48 V lithium battery
Rotation Speed
- 0 to 300 rpm, variable speed
Depth per Pass
- 20 cm
Extension Rod Length
- 30 cm or 50 cm
Auger
- Replaceable spiral auger with a depth scale
Motor Unit Size
- 55 × 50 × 35 cm
Setup Guide
How do I keep soil from one point out of the next sample?
The auger is replaceable, so swap in a clean one at each point.
Can I get an auger for a depth other than the standard 20 cm per pass?
Yes. Augers for other depths are made on request.
Does the sampler need a power outlet in the field?
No. It runs on its 48 V lithium battery.
Have a question about this product?
Have a question? Just ask.
Send it over and we'll email you a personalized answer, with no call or scheduling.
Prefer to talk it through?
Frequently Bought Together
